Flying junction: with a bridge, trains do not block each other
A flying junction or flyover is a railway junction at which one or more diverging or converging tracks in a multiple-track route cross other tracks on the route by bridge to avoid conflict with other train movements. A more technical term is "grade-separated junction". A burrowing junction or dive-under occurs where the diverging line passes below the main line.
The alternative to grade separation is a level junction or flat junction, where tracks cross at grade, and conflicting routes must be protected by interlocked signals.
Complexity
Fretin triangle in France: Each side is more than 3 km (2 mi) long. A grade-separated wye. TGV and Eurostar trains cross the junction at 300 km/h (186 mph).
Simple flying junctions may have a single track pass over or under other tracks to avoid conflict; complex flying junctions may have elaborate infrastructure to allow multiple routings without trains coming into conflict, in the manner of a highway stack interchange.
Flying junction without crossings
Where two lines each of two tracks merge with a flying junction, they can become a four-track railway together, the tracks paired by direction. This happens regularly in the Netherlands (see Examples below).
High-speed rail
Nearly all junctions with high-speed railways are grade-separated. On the French Lignes à Grande Vitesse (TGV) high-speed network, the principal junction on the LGV Sud-Est, at Pasilly where the line to Dijon diverges, and on the LGV Atlantique at Courtalain where the line to Le Mans diverges, are fully grade-separated with special high-speed switches (points in British terminology) that permit the normal line speed of 300 km/h (186 mph) on the main line, and a diverging speed of 220 km/h (137 mph).[note 1]
The LGV network has four grade-separated high-speed triangles: Fretin (near Lille), Coubert (southeast Paris), Claye-Souilly (northeast Paris) and Angles (Avignon). A fifth, Vémars (northeast Paris), is grade-separated except for a single-track link on the least-used side, linking Paris Gare du Nord and Paris CDG airport.
Sandvika, east of and west of (59°53′47″N 10°32′10″E / 59.896373°N 10.536113°E / 59.896373; 10.536113) (59°53′26″N 10°30′29″E / 59.890663°N 10.508148°E / 59.890663; 10.508148)
The B branch splits off from the C and D branches of the MBTA Green Line via an underground flying junction just west of Kenmore station.
The Union Square spur splits off from the Green Line Extension of the MBTA Green Line via an aerial flying junction on the Red Bridge viaduct in the Inner Belt area of Somerville, Massachusetts just north of Lechmere station in Cambridge. Lead tracks to the GLX maintenance facility also split off from the junction slightly further west.
The two southern branches of the MBTA Red Line in Boston split via a flying junction just north of JFK/UMass station. In addition, lead tracks to Cabot Yard maintenance facilities branch off from the junction.
On the Chicago "L", where Orange Line trains diverge from Green Line trains north of 18th Street, as well as underground where a non-revenue flying junction separates Red Line trains heading to 95th from those heading to the South Side main line, currently used to send some rush-period Red Line trains to Ashland/63rd.
The Milwaukee–Dearborn subway (now part of the Blue Line) was constructed to have a flying junction where turning between Lake Street and Milwaukee Avenue at Canal Street. The outbound tunnel and its stub, designed to continue west under Lake Street, was bored at less depth than the inbound tunnel and its Lake Street stub, in order to allow future Lake Street trains (now part of the Green and (Pink Lines) to run under or over the opposing Milwaukee Avenue trains while entering or exiting the shared portion of the Lake Street tunnels. Plans in 1939 called for tunnels to replace the elevated Lake Street tracks east of approximately Racine Avenue.[1][2] By 1962, the planned Lake Street tunnels to/from Racine Avenue would have curved south to Randolph Street and bypassed the Milwaukee-Lake-Dearborn tunnel entirely.[3]
On the Regional Transportation District in Denver between the Southeast Corridor and the I-225 Corridor: the Southeast Corridor is on the west side of I-25 and the I-225 Corridor is in the median of I-225. The grade separations of the junction are woven into the grade separations of the interchange between the two highways.
On the New York City Subway there is an above-ground example at Hammel's Wye on the IND Rockaway Line, as well as numerous below-ground examples across the network
On SEPTA's Broad Street subway, where Broad-Ridge Spur trains diverge at Fairmount. There are also provisions for flying junctions north of Erie for the Roosevelt Boulevard Subway, and north of Olney for an extension on North Broad Street; both are maintained as layup tracks.
All main-line connections on the Washington Metro – adjacent to the Pepco power plant on Benning Road (near the Stadium-Armory station) is a large three-track structure with a turnback pocket where the Blue, Silver and Orange Lines meet. This would have been part of the Oklahoma Avenue station, had it been built. South of the King Street station in Alexandria is a series of tunnels where the Blue and Yellow Lines meet. There are also flying junctions near three underground rail stations: Rosslyn (Blue, Silver, and Orange Lines), L'Enfant Plaza (Green and Yellow lines), and the Pentagon (Blue and Yellow lines).
^See "Courtalain" on the French language Wikipedia.
References
^City of Chicago, Department of Subways and Traction, Second Annual Report of the Department of Subways and Traction, City of Chicago, for the Year Ending December 31, 1940 (Chicago: City of Chicago, December 31, 1940).
^Chicago Department of Subways and Traction, Comprehensive Plan, 2-29, III-VII.
^Chicago Transit Board, Plan for Expanding Rapid Transit Service in the Central Area of Chicago (Chicago: Chicago Transit Board, April 20, 1962).
External links
Wikimedia Commons has media related to Flying junctions.
WikiMapia link – aerial photo of Fretin triangle (mentioned above)
Photo link – flying junction on Pennsylvania Railroad north of 30th Street Station, Philadelphia, Pennsylvania, United States
Photo link – simpler flying junction at terminus of Market–Frankford transit line, 69th Street Station, Philadelphia, Pennsylvania, United States
