Esta es una lista de números de puerto TCP y UDP utilizados por los protocolos para el funcionamiento de aplicaciones de red. El Protocolo de control de transmisión (TCP) y el Protocolo de datagramas de usuario (UDP) solo necesitan un puerto para el tráfico dúplex y bidireccional. Por lo general, utilizan números de puerto que coinciden con los servicios de la implementación TCP o UDP correspondiente, si existen.
La Autoridad de Números Asignados de Internet (IANA) es responsable de mantener las asignaciones oficiales de números de puerto para usos específicos. [1] Sin embargo, en la práctica se dan muchos usos no oficiales de números de puerto tanto conocidos como registrados. De manera similar, muchas de las asignaciones oficiales se refieren a protocolos que nunca fueron de uso común o que ya no lo son. En este artículo se enumeran los números de puerto y sus protocolos asociados que han experimentado una adopción significativa.
Leyenda de la tabla
Puertos conocidos
Los números de puerto en el rango de 0 a 1023 (0 a 2 10 − 1) son los puertos conocidos o puertos del sistema . [3] Son utilizados por procesos del sistema que proporcionan tipos de servicios de red ampliamente utilizados. En sistemas operativos tipo Unix , un proceso debe ejecutarse con privilegios de superusuario para poder vincular un socket de red a una dirección IP utilizando uno de los puertos conocidos. [5]
Puertos registrados
El rango de números de puerto de 1024 a 49151 (2 10 a 2 15 + 2 14 − 1) son los puertos registrados . Son asignados por IANA para un servicio específico a solicitud de una entidad solicitante. [2] En la mayoría de los sistemas, los puertos registrados se pueden usar sin privilegios de superusuario.
Dynamic, private or ephemeral ports
The range 49152–65535 (215 + 214 to 216 − 1), 16 384 ports, contains dynamic or private ports that cannot be registered with IANA.[474] This range is used for private or customized services, for temporary purposes, and for automatic allocation of ephemeral ports.
Note
- ^ TCP port 465 was originally assigned to allow the use of SMTP over SSL (SMTPS), but practical concerns meant that it was left unused and according to the registration rules at that time was subsequently revoked and eventually re-assigned for use by Cisco's URD protocol. Subsequently, port 587 was assigned as the SMTP submission port, but was initially in plaintext, with encryption eventually provided years later by the STARTTLS extension. At the same time, the subsequent adoption of the usage of 465 as an SSL-enabled SMTP submission port, even though the original registration did not envision that usage and despite the fact that it was registered to another service has endured. Subsequently, RFC 8314, in a special exemption to the normal assignment process as defined by RFC 6335, acknowledges the de-facto situation and not only designates message submission over implicit TLS as an 'alternate usage assignment' but establishes this as the preferred method and calls for transition away from port 587 and STARTTLS.
- ^ Deployment typically occurs only directly over UDP, but other underlying protocol layers which meet the requirements described in the specification are possible.
See also
[210]
References and notes
- ^ "Service Name and Transport Protocol Port Number Registry". Internet Assigned Numbers Authority. Retrieved 8 October 2023.
- ^ a b c d e f g h i j k l m n o p "Service Name and Transport Protocol Port Number Registry". The Internet Assigned Numbers Authority (IA).
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak al am an Michelle Cotton; Lars Eggert; et al. (August 2011). Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry. IETF. doi:10.17487/RFC6335. BCP 165. RFC 6335. Retrieved 2014-04-01.
- ^ Touch, Joe (August 2015). Recommendations on Using Assigned Transport Port Numbers. IETF. doi:10.17487/RFC7605. BCP 165. RFC 7605. Retrieved 2018-04-08.
- ^
services(5)
– Linux File Formats Manual. "... Port numbers below 1024 (so-called "low numbered" ports) can only be bound to by root ... Well-known port numbers specified by the IANA are normally located in this root-only space. ..." - ^ "Linux/net/ipv4/inet_connection_sock.c". LXR. Archived from the original on 2015-04-02. Retrieved 2015-01-17.
- ^ Lottor, M. (November 1988). TCP Port Service Multiplexer (TCPMUX). IETF. pp. 1–2. doi:10.17487/RFC1078. RFC 1078. Retrieved 2016-09-28.
- ^ Bressler, Rober; Guida, Richard; McKenzie, Alex (16 October 1972). Remote Job Entry Protocol. IETF. doi:10.17487/RFC0407. RFC 407. Retrieved 2018-04-08.
- ^ Bierman, A.; Bucci, C.; Iddon, R. (August 2000). Remote Network Monitoring MIB Protocol Identifier Macros. IETF. doi:10.17487/RFC2896. RFC 2896. Retrieved 2018-07-13.
- ^ Postel, J. (May 1983). Echo Protocol. IETF. p. 1. doi:10.17487/RFC0862. STD 20. RFC 862. Retrieved 2016-09-28.
- ^ a b c d e f g h i j k l m n o p q r s t u v w x y z aa ab ac ad ae af ag ah ai aj ak al am an ao ap aq ar as at au av aw ax ay az ba bb bc bd be bf bg bh bi bj bk bl bm bn bo bp bq br bs bt bu bv bw bx by bz ca cb "TCP and UDP ports used by Apple software products". Support. Apple (published 2021-06-14). 2014-11-08. Archived from the original on 2021-10-15. Retrieved 2021-10-19.
- ^ a b c d e f g h Stewart, Randall R., ed. (September 2007). Stream Control Transmission Protocol. IETF. pp. 135–136. doi:10.17487/RFC4960. RFC 4960. Retrieved 2016-09-27.
- ^ Postel, J. (May 1983). Discard Protocol. IETF. p. 1. doi:10.17487/RFC0863. STD 21. RFC 863. Retrieved 2016-10-07.
- ^ "How to Configure the Ports Used for Wake On LAN". Microsoft TechNet. n.d. Archived from the original on 2016-09-27. Retrieved 2016-09-27.
... The default port for the wake-up transmission is UDP port 9. ...
- ^ a b "systat and netstat". eTutorials.
... The ps -ef
and netstat -a
commands are bound to TCP ports 11 and 15, respectively. ...
- ^ Postel, J. (May 1983). Active Users. IETF. doi:10.17487/RFC0866. STD 24. RFC 866.
- ^ Postel, J. (May 1983). Daytime Protocol. IETF. p. 1. doi:10.17487/RFC0867. STD 25. RFC 867. Retrieved 2016-09-27.
- ^ Postel, J. (May 1983). Quote of the Day Protocol. IETF. p. 1. doi:10.17487/RFC0865. STD 23. RFC 865. Retrieved 2016-09-27.
- ^ Nelson, Russell (June 1990). Message Send Protocol. IETF. p. 1. doi:10.17487/RFC1159. RFC 1159. Retrieved 2016-09-27.
- ^ Nelson, Russell; Arnold, Geoff (April 1992). Message Send Protocol 2. IETF. pp. 3–4. doi:10.17487/RFC1312. RFC 1312. Retrieved 2016-09-27.
- ^ Postel, J. (May 1983). Character Generator Protocol. IETF. p. 1. doi:10.17487/RFC0864. STD 22. RFC 864. Retrieved 2016-09-27.
- ^ Postel, J. (June 1980). File Transfer Protocol specification. IETF. p. 57. doi:10.17487/RFC0765. RFC 765. IEN 149. Retrieved 2016-09-27.
- ^ Postel, J.; Reynolds, J. (October 1985). File Transfer Protocol. IETF. p. 59. doi:10.17487/RFC0959. STD 9. RFC 959. Retrieved 2016-09-27.
- ^ Postel, J.; Reynolds, J. (May 1983). Telnet Protocol Specification. IETF. p. 15. doi:10.17487/RFC0854. STD 8. RFC 854. Retrieved 2016-09-28.
- ^ Postel, Jonathan B. (August 1982). Simple Mail Transfer Protocol. IETF. p. 44. doi:10.17487/RFC0821. STD 10. RFC 821. Retrieved 2016-09-28.
- ^ "National Software Works, Status report no.1" (PDF). apps.dtic.mil. Retrieved 16 September 2024.
- ^ a b c d "HA Links and Backup Links". docs.paloaltonetworks.com. Palo Alto Networks. Retrieved 14 September 2020.
- ^ Postel, J.; Harrenstien, K. (May 1983). Time Protocol. IETF. pp. 1–2. doi:10.17487/RFC0868. STD 26. RFC 868. Retrieved 2016-09-28.
- ^ Postel, J. (August 1979). Internet Name Server. IETF. IEN 116. Retrieved 2016-09-28.
- ^ Harrenstien, Ken; White, Vic (1982-03-01). NICNAME/WHOIS. IETF. p. 1. doi:10.17487/RFC0812. RFC 812. Retrieved 2016-09-28.
- ^ Harrenstien, K.; Stahl, M.; Feinler, E. (October 1985). NICNAME/WHOIS. IETF. p. 2. doi:10.17487/RFC0954. RFC 954. Retrieved 2016-09-28.
- ^ Daigle, Leslie (September 2004). WHOIS Protocol Specification. Ran Atkinson, Ken Harrenstien, Mary Stahl, Elizabeth Feinler. IETF. p. 2. doi:10.17487/RFC3912. RFC 3912. Retrieved 2016-09-28.
- ^ Finseth, Craig A. (July 1993). An Access Control Protocol, Sometimes Called TACACS. IETF. p. 7. doi:10.17487/RFC1492. RFC 1492. Retrieved 2016-09-28.
- ^ TACACS+ Team (15 April 2018). The TACACS+ Protocol. IETF. I-D opsawg-tacacs-10. Retrieved 2018-07-18.
- ^ Malis, Andrew G. (May 1983). "IMP Logical Addressing Implementation Specification, report 5256" (PDF). BBN – Bolt Beranek and Newman Inc. Retrieved 2018-07-18.
- ^ a b c d IBM Corp. (14 September 2002). "AIX 5.2 Communications Programming Concepts, Chapter 12. Xerox Network System". Retrieved 2018-07-25.
- ^ Mockapetris, P. (November 1987). DNS Implementation and Specification. IETF. doi:10.17487/RFC1035. RFC 1035. Retrieved 2018-07-18.
- ^ Reynolds, J.; Postel, J. (March 1990). Assigned Numbers. IETF. p. 9. doi:10.17487/RFC1060. RFC 1060. Retrieved 2018-07-24.
- ^ Bennett, C. J. (January 1981). "A Simple NIFTP-Based Mail System". INDRA. Retrieved 2018-07-18.
- ^ Sollins, Karen R. (1980-01-29). The TFTP Protocol. IETF. p. 6. IEN 133. Retrieved 2016-10-16.
- ^ Sollins, K.R. (June 1981). TFTP Protocol (revision 2). Noel Chiappa, Bob Baldwin, Dave Clark, Steve Szymanski, Larry Allen, Geoff Cooper, Mike Greenwald, Liza Martin, David Reed. IETF. pp. 6, 14, 16. doi:10.17487/RFC0783. RFC 783. Retrieved 2016-10-16.
- ^ Sollins, Karen R. (July 1992). The TFTP Protocol (Revision 2). IETF. pp. 4–5, 9, 10. doi:10.17487/RFC1350. STD 33. RFC 1350. Retrieved 2016-10-16.
- ^ Anklesaria, Farhad; McCahill, M.; Lindner, Paul; Johnson, David; Torrey, Daniel; Alberti, Bob (March 1993). The Internet Gopher Protocol (a distributed document search and retrieval protocol). IETF. pp. 1, 4–5, 7, 11–13. doi:10.17487/RFC1436. RFC 1436. Retrieved 2016-10-16.
... This protocol assumes a reliable data stream; TCP is assumed. Gopher servers should listen on port 70 (port 70 is assigned to Internet Gopher by IANA). ...
- ^ Braden, R. (1971-01-13). NETRJS: A third level protocol for Remote Job Entry. IETF. doi:10.17487/RFC0088. RFC 88. Retrieved 2016-10-16.
- ^ Braden, R. (1977-11-22). NETRJS Protocol. IETF. p. 3. doi:10.17487/RFC0740. RFC 740. Retrieved 2016-10-16.
- ^ Postel, Jon; Vernon, J. (January 1983). Assigned Numbers. IETF. p. 10. doi:10.17487/RFC0820. RFC 820. Retrieved 2016-10-16.
- ^ Karrenstien, K. (1977-12-30). NAME/FINGER Protocol. IETF. p. 1. doi:10.17487/RFC0742. RFC 742. Retrieved 2016-10-16.
- ^ Zimmerman, David Paul (December 1991). "Flow of events". The Finger User Information Protocol. IETF. p. 4. sec. 2.1. doi:10.17487/RFC1288. RFC 1288. Retrieved 2016-10-16.
... Finger is based on the Transmission Control Protocol, using TCP port 79 decimal ...
- ^ a b Fielding, Roy T.; Reschke, Julian F., eds. (June 2014). Hypertext Transfer Protocol (HTTP/1.1): Message Syntax and Routing. IETF. pp. 11, 17, 19, 42–43, 50. doi:10.17487/RFC7230. RFC 7230. Retrieved 2016-10-16.
- ^ a b Belshe, Mike; Peon, Roberto (May 2015). "Starting HTTP/2". In Thomson, Martin (ed.). Hypertext Transfer Protocol Version 2 (HTTP/2). IETF. p. 7. sec. 3. doi:10.17487/RFC7540. RFC 7540. Retrieved 2016-10-16.
... HTTP/2 uses the same "http" and "https" URI schemes used by HTTP/1.1. HTTP/2 shares the same default port numbers: 80 for "http" URIs and 443 for "https" URIs. ...
- ^ a b Iyengar, J.; Thomson, M. QUIC: A UDP-Based Multiplexed and Secure Transport. IETF. I-D ietf-quic-transport. Retrieved 2018-07-25.
- ^ Britton, T., Liu-Johnston, I., Cugnière, I., Gupta, S., Rodriguez, D., Barbier, J., & Tricaud, S. Analysis of 24 hours internet attacks.
- ^ "Using Nmap for Outbound Traffic Analysis". Hacking Practical Protection. Warsaw, Poland: Hakin9 Media. 2013.
- ^ Kohl, John; Neuman, B. Clifford (September 1993). "IP transport". The Kerberos Network Authentication Service (V5). IETF. pp. 81–82. sec. 8.2.1. doi:10.17487/RFC1510. RFC 1510. Retrieved 2016-10-16.
... When contacting a Kerberos server (KDC) ... the client shall send a UDP datagram containing only an encoding of the request to port 88 (decimal) at the KDC's IP address ...
- ^ Neuman, Clifford; Yu, Tom; Hartman, Sam; Raeburn, Kenneth (July 2005). The Kerberos Network Authentication Service (V5). Acknowledgements to John Kohl et al. in section 11 "Acknowledgements", pages 121–122. IETF. pp. 102–103, 105. doi:10.17487/RFC4120. RFC 4120. Retrieved 2016-10-16.
... Kerberos servers (KDCs) supporting IP transports MUST accept TCP ... UDP requests and SHOULD listen for them on port 88 (decimal) ...
- ^ Crispin, Mark (7 October 1977). SUPDUP Protocol. IETF. pp. 15. doi:10.17487/RFC0734. RFC 734. Retrieved 2019-09-24.
- ^ Harrenstien, K.; Stahl, M.; Feinler, E. (October 1985). HOSTNAME SERVER. IETF. pp. 1. doi:10.17487/RFC953. RFC 953. Retrieved 2018-07-26.
- ^ Cass, D. E.; Rose, M. T. (April 1986). ISO Transport Services on Top of the TCP. IETF. pp. 5, 8, 12–13, 23–24. doi:10.17487/RFC0983. RFC 983. Retrieved 2016-10-17.
... A TSAP server begins by LISTENing on TCP port 102. ...
- ^ Rose, Marshall T.; Cass, Dwight E. (May 1987). ISO Transport Service on top of the TCP Version: 3. IETF. pp. 1, 13. doi:10.17487/RFC1006. STD 35. RFC 1006. Retrieved 2016-10-17.
... TCP port 102 is reserved for hosts which implement this standard. ...
- ^ Hedberg, Roland; Pomes, Paul (September 1998). "Basic Operation". The CCSO Nameserver (Ph) Architecture. IETF. p. 4. sec. 2. doi:10.17487/RFC2378. RFC 2378. Retrieved 2016-10-17.
... Initially, the server host starts the Ph service by listening on TCP port 105. ...
- ^ Postel, Jon (November 1982). The Remote User Telnet Service. IETF. p. 1. doi:10.17487/RFC0818. RFC 818. Retrieved 2016-10-17.
... the specific service of User Telnet may be accessed (on hosts that choose to provide it) by opening a connection to port 107 (153 octal). ...
- ^ Butler, M.; Postel, J.; Chase, D.; Goldberger, J.; Reynolds, J. K. (February 1985). Post Office Protocol: Version 2. IETF. p. 1. doi:10.17487/RFC0937. RFC 937. Retrieved 2016-10-17.
... This protocol assumes a reliable data stream such as provided by TCP or any similar protocol. When TCP is used, the POP2 server listens on port 109 ...
- ^ Rose, Marshall (November 1988). Post Office Protocol: Version 3. IETF. pp. 2, 13. doi:10.17487/RFC1081. RFC 1081. Retrieved 2016-10-17.
... the server host starts the POP3 service by listening on TCP port 110. ...
- ^ Myers, John G.; Rose, Marshall T. (May 1996). Post Office Protocol - Version 3. IETF. pp. 3, 19. doi:10.17487/RFC1939. STD 53. RFC 1939. Retrieved 2016-10-17.
... the server host starts the POP3 service by listening on TCP port 110. ...
- ^ St. Johns, Michael C. (February 1993). "Overview". Identification Protocol. Acknowledgement is given to Dan Bernstein in section 7, "Acknowledgements", page 8. IETF. p. 113. sec. 2. doi:10.17487/RFC1413. RFC 1413. Retrieved 2016-10-17.
... The Identification Protocol (a.k.a., "ident", a.k.a., "the Ident Protocol") ... listens for TCP connections on TCP port 113 (decimal). ...
- ^ St. Johns, Michael C. (January 1985). Authentication Server. IETF. p. 1. doi:10.17487/RFC0931. RFC 931. Retrieved 2016-10-17.
... The Authentication Server Protocol provides a means to determine the identity of a user of a particular TCP connection. ... A server listens for TCP connections on TCP port 113 (decimal). ...
- ^ Lottor, Mark K. (September 1984). Postel, Jon (ed.). Simple File Transfer Protocol. IETF. p. 1. doi:10.17487/RFC0931. RFC 913. Retrieved 2016-10-17.
... SFTP is used by opening a TCP connection to the remote hosts' SFTP port (115 decimal). ...
- ^ a b c d e Assigned Numbers. IETF. doi:10.17487/RFC1340. RFC 1340. Retrieved 2014-05-27.
- ^ Kantor, Brian; Lapsley, Phil (February 1986). Network News Transfer Protocol. IETF. pp. 5, 20–23. doi:10.17487/RFC0977. RFC 977. Retrieved 2016-10-17.
... NNTP specifies a protocol for the distribution, inquiry, retrieval, and posting of news articles ... When used via Internet TCP, the contact port assigned for this service is 119. ...
- ^ Feather, Clive D.W. (October 2006). "Reading and Transit Servers". Network News Transfer Protocol (NNTP). Acknowledgements to NNTP Working Group (Russ Allbery, Ned Freed), Brian Kantor, Phil Lapsley et al.) in section 13, "Acknowledgements", pages 107–109. IETF. p. 21. sec. 3.4.1. doi:10.17487/RFC3977. RFC 3977. Retrieved 2016-10-17.
... Network News Transfer Protocol (NNTP) ... is used for the distribution, inquiry, retrieval, and posting of Netnews articles using a reliable stream-based mechanism. ... The official TCP port for the NNTP service is 119. ...
- ^ "COM Fundamentals – Guide – COM Clients and Servers – Inter-Object Communications – Microsoft RPC". microsoft.com. Retrieved 2014-05-27.
- ^ a b c NetBIOS Working Group (March 1987). Protocol standard for a NetBIOS service on a TCP/UDP transport: Concepts and methods. Acknowledgements to Internet Activities Board's End-to-End Services Task Force et al. in section 2, "Acknowledgements", page 6. IETF. doi:10.17487/RFC1001. STD 19. RFC 1001. Retrieved 2016-10-17.
- ^ a b c NetBIOS Working Group (March 1987). Protocol standard for a NetBIOS service on a TCP/UDP transport: Detailed specifications. Acknowledgements to Internet Activities Board in section 2, "Acknowledgements", page 4. IETF. doi:10.17487/RFC1002. STD 19. RFC 1002. Retrieved 2016-10-17.
- ^ Crispin, Mark R. (March 2003). INTERNET MESSAGE ACCESS PROTOCOL – VERSION 4rev1. IETF. doi:10.17487/RFC3501. RFC 3501. Retrieved 2016-10-17.
... The Internet Message Access Protocol ... allows a client to access and manipulate electronic mail messages on a server. ... The IMAP4rev1 protocol assumes a reliable data stream such as that provided by TCP. When TCP is used, an IMAP4rev1 server listens on port 143. ...
- ^ DeSchon, A.; Braden, R. (August 1988). Background File Transfer Program (BFTP). IETF. pp. 4, 14, 20, 24. doi:10.17487/RFC1068. RFC 1068. Retrieved 2016-10-17.
... The BFTP program ... can be executed as a remotely-accessible service that can be reached via a Telnet connection to the BFTP well-known port (152). ...
- ^ Davin, J.; Case, J.; Fedor, M.; Schoffstall, M. (November 1987). "The Authentication Protocol". Simple Gateway Monitoring Protocol. IETF. p. 10. sec. 4. doi:10.17487/RFC1028. RFC 1028. Retrieved 2016-10-17.
... This memo defines a simple application-layer protocol by which management information for a gateway may be inspected or altered by logically remote users. ... An authentication protocol entity responds to protocol messages received at UDP port 153 on the host with which it is associated. ...
- ^ Lambert, M. (June 1988). PCMAIL: A distributed mail system for personal computers. IETF. p. 8. doi:10.17487/RFC1056. RFC 1056. Retrieved 2016-10-17.
... Pcmail is a distributed mail system providing mail service to an arbitrary number of users ... The TCP contact port for DMSP has been designated 158. ...
- ^ Packard, Keith (2004). X Display Manager Control Protocol (Version 1.1 ed.). The Open Group. Archived from the original on 2016-01-09. Retrieved 2016-10-17.
... The purpose of the X Display Manager Control Protocol (XDMCP) is to provide a uniform mechanism for an autonomous display to request login service from a remote host. ... When XDMCP is implemented on top of the Internet User Datagram Protocol (UDP), port number 177 is to be used. ...
[self-published source] - ^ Rekhter, Yakov; Li, Tony; Hares, Susan, eds. (January 2006). A Border Gateway Protocol 4 (BGP-4). Acknowledgements to Kirk Lougheed et al. in section 2, "Acknowledgements", pages 6–7. IETF. pp. 8, 47–48, 51–52. doi:10.17487/RFC4271. RFC 4271. Retrieved 2016-10-17.
... BGP listens on TCP port 179. ...
- ^ a b Hartmann, Hartmann (August 2014). Default Port for Internet Relay Chat (IRC) via TLS/SSL. IETF. p. 2. doi:10.17487/RFC7194. RFC 7194. Retrieved 2016-10-06.
... Although system port assignments exist for IRC traffic that is plain text (TCP/UDP port 194) or TLS/SSL encrypted (TCP/UDP port 994), it is common practice amongst IRC networks not to use them for reasons of convenience and general availability on systems where no root access is granted or desired. ...
- ^ a b SNMP MUX Protocol and MIB. IETF. May 1991. p. 8. doi:10.17487/RFC1227. RFC 1227. Retrieved 2019-10-15.
When using the TCP to provide the transport-backing for the SMUX protocol, the SNMP agent listens on TCP port 199.
- ^ Bernstein, Daniel B. "Quick Mail Transfer Protocol (QMTP)". Retrieved 2018-04-18.
... A QMTP client connects to a QMTP server, as discussed in section 7, over a reliable stream protocol allowing transmission of 8-bit bytes. ... QMTP may be used on top of TCP. A QMTP-over-TCP server listens for TCP connections on port 209. ...
[self-published source] - ^ "The Spartan Protocol Specification". 2021-03-24. Retrieved 2023-08-30.
... The default port for spartan URLs is 300, in reference to Battle of Thermopylae when 300 spartan soldiers stood ground against an invading Persian army. ...
- ^ Bush; Austein (2013-01-01). The Resource Public Key Infrastructure (RPKI) to Router Protocol. doi:10.17487/RFC6810. RFC 6810. Retrieved 2024-03-12.
- ^ "Virus Alerts – SecureCastFAQ". nai.com. Santa Clara, CA, USA: Network Associates, Inc., now McAfee. 2000. Archived from the original on 2000-03-03. Retrieved 2013-10-26.
- ^ Appletalk Update-Based Routing Protocol: Enhanced App. doi:10.17487/RFC1504. RFC 1504. Retrieved 16 March 2015.
- ^ steve (2005-07-12). "LDM Preinstallation Steps". LDM Reference. 6.13.6. Unidata. Archived from the original on 2018-11-21. Retrieved 2018-11-21.
... In order for the LDM system to send data to a downstream LDM, the firewall rules must allow incoming TCP connections to the port on which the LDM server is listening (the default is 388). ...
[self-published source] - ^ "The Unidata LDM and Network Security". Unidata. Archived from the original on 2018-11-21. Retrieved 2018-11-21.
... Use of the LDM requires that any host listed in its access control list be allowed a TCP connection to port 388 on the localhost. If the localhost is behind a firewall, the firewall must allow TCP access to port 388. ...
[self-published source] - ^ "Active Directory and Active Directory Domain Services Port Requirements". Microsoft TechNet (published 2014-03-28). n.d. Archived from the original on 2017-08-02. Retrieved 2017-08-02.
- ^ a b "Service Name and Transport Protocol Port Number Registry". Internet Assigned Numbers Authority.
- ^ a b Moore, Keith; Newman, Chris (January 2018). Cleartext Considered Obsolete: Use of Transport Layer Security (TLS) for Email Submission and Access. Internet Engineering Task Force. pp. 18–19. doi:10.17487/RFC8314. RFC 8314.
In brief, this memo now recommends that:... Connections to Mail Submission Servers... be made using 'Implicit TLS' [on port 465]... in preference to connecting to the 'cleartext' port [587] and negotiating TLS using the STARTTLS command....
- ^ https://www.centrosoftware.com/ [bare URL]
- ^ Zwicky, Elizabeth D.; Cooper, Simon; Chapman, D. Brent (June 2000) [1st pub. 1995]. "Internet Message Access Protocol (IMAP)". Building Internet Firewalls (Second ed.). O'Reilly. 16.7. ISBN 978-1-56592-871-8. Retrieved 2016-10-27.
... IMAP over SSL currently uses port 993, but an earlier convention uses port 585. ...
- ^ Message Submission for Mail. IETF. doi:10.17487/RFC4409. RFC 4409. Retrieved 2014-05-27.
- ^ The TUNNEL Profile. IETF. doi:10.17487/RFC3620. RFC 3620. Retrieved 2014-05-27.
- ^ INTERNET DRAFT, DHCP Failover Protocol (expired: September 2003)
- ^ VeriSign Registry Registrar Protocol (RRP) Version 2.0.0. IETF. doi:10.17487/RFC3632. RFC 3632. Retrieved 2014-05-27.
- ^ "IEEE Standard (1244.3-2000) for Media Management System (MMS) Media Management Protocol (MMP)". IEEE. 2001-04-26. Archived from the original on 2009-02-20. Retrieved 2014-05-27.
- ^ "Integrated Virtualization Manager on IBM System p5" (PDF). IBM. Retrieved 2014-05-27.
- ^ "Airserv-ng [Aircrack-ng]".
- ^ CORBA IIOP SSL from IANA Service Names
- ^ "IEEE Standard (1244.2-2000) for Media Management Systems (MMS) Session Security, Authentication, Initialization Protocol (SSAIP)". IEEE. 2000-12-07. Archived from the original on 2010-04-12. Retrieved 2014-05-27.
- ^ Link Management Protocol. IETF. doi:10.17487/RFC4204. RFC 4204. Retrieved 2014-05-27.
- ^ IRIS: The Internet Registry Information Service (IRIS) Core Protocol. IETF. doi:10.17487/RFC3981. RFC 3981. Retrieved 2014-05-27.
- ^ "Internet Registry Information Service (IRIS)". Archived from the original on February 1, 2009.
- ^ "Internet-Draft, Using the Internet Registry Information Service (IRIS) over the Blocks Extensible Exchange Protocol (BEEP)". IETF. Retrieved 2014-05-27.
- ^ Katz, Dave; Davie, Bruce S.; Rekhter, Yakov; Rosen, Eric C.; Doolan, Paul (1997-05-27). "Tag Distribution Protocol Internet-Draft". Ietf Datatracker. Retrieved 2014-05-27.
- ^ "United States Patent 7286529, Discovery and tag space identifiers in a tag distribution protocol (TDP)". Patentstorm.us. Archived from the original on 2012-09-19. Retrieved 2014-05-27.
- ^ "Networking Software (IOS and NX-OS)". Cisco. Archived from the original on January 18, 2012.
- ^ "Cisco IOS Software Releases 12.0 S, MPLS Label Distribution Protocol (LDP)".[permanent dead link]
- ^ "Arrangement in a Router of a Mobile Network for Optimizing Use of Messages Carry8ing Reverse Routing Headers". WIPO (published 2004-07-01). 2003-12-11. Archived from the original on 2017-05-19. Retrieved 2017-05-19.
- ^ "MODBUS/TCP Security Protocol Specification" (PDF). Modbus Organisation Inc. Retrieved 2019-07-25.
- ^ Adams, Carlisle; Farrell, Stephen; Kause, Tomi; Mononen, Tero (September 2005). Internet X.509 Public Key Infrastructure Certificate Management Protocol (CMP). IETF. doi:10.17487/RFC4210. RFC 4210. Retrieved 2017-11-10.
- ^ "Setting up a socket policy file server". Adobe.com. 2008-04-14. Retrieved 2014-05-27.
- ^ "Reservation of a Dedicated Port". DNS over Dedicated QUIC Connections. May 2022. sec. 8.2. doi:10.17487/RFC9250. RFC 9250. Retrieved 2022-06-12.
Description: DNS query-response protocol run over DTLS or QUIC
- ^ a b "vCenter Server 4.1 network port requirements". VMware Knowledge Base. 2014-07-29. Archived from the original on 2016-10-06. Retrieved 2016-10-06.
- ^ a b "Required ports for configuring an external firewall to allow ESX/ESXi and vCenter Server traffic". VMware Knowledge Base. 2014-08-01. Archived from the original on 2016-10-06. Retrieved 2016-10-06.
- ^ "Using rndc". Red Hat Enterprise Linux Deployment Guide (5.0.0–19 ed.). Red Hat (published 2007-01-23). 2006. 16.4. Archived from the original on 2016-10-06. Retrieved 2016-10-06.
... default TCP port 953 ... allow rndc
commands ...
- ^
rndc(8)
– Linux Administration and Privileged Commands Manual. "... TCP port ... BIND 9's default control channel port, 953. ..." - ^ "NG FAQ – Ports used by Check Point VPN-1/FireWall-1 Next Generation". FW-1.de (published 2007-01-02). n.d. Archived from the original on 2016-10-06. Retrieved 2016-10-06.
... 981 /tcp ... remote administration from external using HTTPS ...
- ^ "Managing Windows Small Business Server 2008 Remote Web Workplace". Microsoft TechNet (published 2009-10-08). n.d. Archived from the original on 2017-07-05. Retrieved 2017-07-05.
...- Windows SBS 2008 must allow connections through TCP ports 80, 443, 987, and 3389.
- The computer used to connect to Remote Web Workplace must allow connections through TCP ports 80, 443, 987, and 3389.
- Routers on Windows SBS 2008 must be configured to forward Internet traffic to TCP ports 80, 443, 987, and 3389.
...
- ^ "Lustre Networking Overview".
... By default, socklnd uses TCP port 988 to create connections, and this must not be blocked by any firewalls. ...
- ^ RFC 4707
- ^ "Appendix A. TCP Ports Used by ThinLinc". ThinLinc Administrator's Guide for ThinLinc 4.6.0. Cendio AB (published 2016). n.d. Archived from the original on 2016-10-06. Retrieved 2016-10-06.
... By default, ThinLinc's web-based administration interface is available on TCP port 1010. ...
- ^ "Setting up reserved (privileged) ports". z/OS Network File System Guide and Reference (PDF) (Version 2 Release 3 ed.). IBM. p. 178. Archived from the original (PDF) on 2018-04-20. Retrieved 2018-04-20.
... The z/OS client attempts to use reserved port 1023 and if that port is not available, the z/OS client will subtract one from 1023 until a reserve [sic?] port is available. ... When specifying secure(udp) or proto(udp), the z/OS client uses the privileged UDP ports to communicate with the NFS servers. When specifying proto(tcp) the z/OS client uses the privileged TCP ports to communicate the MOUNT RPC or UNMOUNT RPC with the NFS server. However, the z/OS client uses the ephemeral TCP ports to communicate NFS RPC with the NFS server. ...
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ Carpenter, Brian; Dan, Wing; Jiang, Sheng Jiang (October 2012). Despres, Remi (ed.). Native IPv6 behind IPv4-to-IPv4 NAT Customer Premises Equipment (6a44). IETF. doi:10.17487/RFC6751. ISSN 2070-1721. RFC 6751. Retrieved 2016-08-28.
- ^ a b c "Installation manual and user guide Remote administrator 5" (PDF). ESET, spol. s r.o. Retrieved 29 January 2015.
- ^ Ramadas, Manikantan; Burleigh, Scott C.; Farrell, Stephen. Licklider Transmission Protocol – Specification. IETF. p. 23. sec. 5. doi:10.17487/RFC5326. RFC 5326.
- ^ Ramadas, Manikantan; Burleigh, Scott C.; Farrell, Stephen. Licklider Transmission Protocol – Specification. IETF. p. 51. sec. 10.1. doi:10.17487/RFC5326. RFC 5326.
- ^ a b c d "Firewall, Proxy, Router and Port Configuration for Blizzard Games". Blizzard Entertainment. 2012-12-07. Archived from the original on 2012-08-08. Retrieved 2013-04-02.
- ^ "Dell OpenManage Version 8.0.1 Port Information Guide" (PDF). Dell. 2014. p. 15. Retrieved 2016-08-27.
- ^ "Basic command line options". The Festival Speech Synthesis System – System documentation (1.4 ed.). University of Edinburgh (published 1999-06-19). 1999-06-17. 7.1. Archived from the original on 2016-08-28. Retrieved 2016-10-27.
... Festival waits for clients on a known port (the value of server_port
, default is 1314). ...
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Strapi Documentation". strapi.io. Retrieved 2020-06-26.
- ^ razerofficial/HTML5ChromaSDK, Razer, 2023-11-16, retrieved 2024-01-10
- ^ Shahid, Shaikh (2016). "Chapter 4, Developing REST API Using Sails.js". Sails.js Essentials. Birmingham, UK: Packt. p. 35. ISBN 9781783554546. OCLC 944986529 – via Google Books (Preview).
...To run our code, type the following command in the terminal:
sails lift
Your app will be running on localhost:1337
. Let's test it. ...
...
- ^ a b Muir, Jeff. "Two Port ICA". p. 1. Archived from the original on 15 June 2012. Retrieved 2008-03-14.
- ^ a b c d "Open communication ports required by IBM Tivoli Storage Manager for Virtual Environments 6.4". Support. IBM. 2016-05-09. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ "Network ports and URLs that are used by Windows Live Messenger". Support. Microsoft.
- ^ "Recommended Port Numbers". Oracle. Retrieved 2015-11-27.
- ^ Hilker, Steve (2013-03-13). "Oracle Default Port Numbers". Oracle Wiki. Toad World. Archived from the original on 2016-08-27. Retrieved 2016-08-27.[user-generated source]
- ^ "Start Network Server". The Apache DB Project. Derby Tutorial. Apache Software Foundation (published 2016-03-23). 2008-04-30. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
Start the Network server by executing the startNetworkServer.bat (Windows) or startNetworkServer (UNIX) script. This will start the Network Server up on port 1527 ...
- ^ "eclipse.org". 31 January 2013. Retrieved 26 June 2018.
- ^ a b c d e f "1C:Enterprise System Requirements". 1c-dn.com. Retrieved 6 June 2018.
- ^ "1C:Enterprise Administrator Guide". 1c-dn.com. Retrieved 6 June 2018.
- ^ a b "Pervasive PSQL Vx Server 11 SP3 Release Notes". Pervasive PSQL. 2013. Retrieved 2016-08-27.
... Pervasive PSQL Vx Server 11 SP3 communicates via the following ones: 3351 for the transactional interface, 1583 for the relational interface, and 139 for named pipes. ...
- ^ a b "FAQ: Frequently Asked Questions". iSketch. n.d. Connection problems. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
... allow TCP/IP connections on port 1626 & 1627 (1627 only needed for sending sketches.)
- ^ a b "RADIUS Overview". juniper.net. Retrieved 16 March 2015.
- ^ a b DeKok, Alan (May 2012). "Assigned Ports for RADIUS/TCP". RADIUS over TCP. IETF. p. 7. doi:10.17487/RFC6613. ISSN 2070-1721. RFC 6613.
- ^ "P4PORT". Perforce. 2012. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
... Valid communications protocols are tcp
(plaintext over TCP/IP) or ssl
(SSL over TCP/IP).
- ^ "How to troubleshoot the Key Management Service (KMS)". TechNet. Microsoft. n.d. Archived from the original on 2016-03-25. Retrieved 2016-08-27.
... 1688 is the default TCP port used by the clients to connect to the KMS host. ...
- ^ Patel, Baiju V.; Aboda, Bernard; Dixon, William; Zorn, Glen; Booth, Skip (November 2001). Securing L2TP using IPsec. Thanks to Gurdeep Singh Pall, David Eitelbach, Peter Ford, Sanjay Anand, John Richardson, Rob Adams. IETF. pp. 8–14, 23–26. doi:10.17487/RFC3193. RFC 3193. Retrieved 2016-08-28.
- ^ "KDEConnect". KDE UserBase Wiki. Retrieved 2 March 2022.
- ^ Jleeke; Tickner, Patrick (2006-10-04). "Linux Server". AAManual (America's Army Game Manual). Archived from the original on 2016-08-16. Retrieved 2016-08-27.
... The port the server will listen on. The default port is 1716.
- ^ "Ports used by some ZENworks products". Novell Support Knowledgebase. Micro Focus (published 2007-04-18). 2012-04-30. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ "TCP and UDP Ports Used by ZENworks Primary Servers". ZENworks 11 SP4 Primary Server and Satellite Reference. Novell (published 2016-05-31). 2016-06-16. Archived from the original on 2016-08-27. Retrieved 2016-08-07.
- ^ "Configuration". Node-RED Documentation. IBM Emerging Technologies. n.d. Archived from the original on 2016-09-09. Retrieved 2016-09-09.
- ^ "Ports and firewalls". Support. Adobe (published 2015-12-14). 2015-02-10. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
... Flash Media Server listens for RTMP/E requests on port 1935/TCP. ... Flash Media Server listens for RTMFP requests on port 1935/UDP. ...
- ^ "Project Gemini. Speculative specification v0.16.1". 2022-01-22. Archived from the original on 2021-05-07. Retrieved 2024-01-04.
When Gemini is served over TCP/IP, servers should listen on port 1965 (the first manned Gemini mission, Gemini 3, flew in March '65). This is an unprivileged port, so it's very easy to run a server as a "nobody" user, even if e.g. the server is written in Go and so can't drop privileges in the traditional fashion
- ^ "Arweave Mining Guide".
- ^ "Hot Standby Router Protocol (HSRP): Frequently Asked Questions". Cisco Support. Cisco Systems (published 2017-10-19). 2014-09-19. Archived from the original on 2014-02-23. Retrieved 2018-04-27.
Q: Are HSRP messages TCP or UDP? A: UDP, since HSRP runs on UDP port 1985.
[self-published source] - ^ Doyle, Michael; Substelny, Mike. Artemis Spaceship Bridge Simulator – Terran Star Naval Academy Tactical Manual 1.70 (PDF) (Windows ed.). p. 8. Archived from the original (PDF) on 2017-06-30. Retrieved 2017-06-30.
... This screen allows the Bridge Crew to connect to the Artemis Simulator. ... The network must also be configured to forward port 2010 to the server machine's local address. ...
- ^ a b "Which ports are required to play Civilization 4 online?". Support. 2K. 2016-07-17. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ a b c d e f "How to Log in to Your Server or Account". cPanel Knowledge Base (published 2016-08-22). 2014-06-24. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ a b c "If you're not getting Apple push notifications". Support. Apple (published 2016-04-15). 2014-11-08. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ a b "Updated APNs provider API deadline". Developer. Apple. 2020-10-09. Retrieved 2022-10-04.
- ^ "What ports do I need to open in my firewall?". DirectAdmin Knowledge Base. JBMC Software (published 2011-05-29). n.d. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
- ^ a b c "Arma 3: Dedicated Server – Bohemia Interactive Community". community.bistudio.com. Retrieved 2021-05-10.
- ^ a b "Known multiplayer issues in Halo: Combat Evolved". Support. Microsoft. [dead link]
- ^ "ARMA 3 Server Hosting". games.fozzy.com. Retrieved 2023-08-19.
- ^ Balderston, David; Boutté, Andy (2016-02-03). "Ghost config.js – Broken Down". Ghost for Beginners. Archived from the original on 2016-09-18. Retrieved 2016-08-28.
... This is the port that Ghost is listening on. By default 2368 is used ...
- ^ a b "Getting started with swarm mode". Docker Documentation. Retrieved 2018-05-08.[self-published source]
- ^ "KGS: Set Preferences". KGS Go Server. Archived from the original on 2016-08-27. Retrieved 2016-08-27.
The TCP/IP port of the KGS server. The default is 2379 ...
- ^ a b Garulli, Luca; Dyer, Kenneth P.J.; Franchini, Roberto (2015-05-13). "OrientDB Server". OrientDB Manual – version 2.1.x (published 2016-05-18). Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... Upon startup, the server runs on port 2424 for the binary protocol and 2480 for the http one. If a port is busy the next free one will be used. The default range is 2424–2430 (binary) and 2480–2490 (http). ...
- ^ "Remote filesystem and AREXX between Amigas". Aminet. Retrieved 2019-08-29.
- ^ Hanna, Stephen R.; Patel, Baiju V.; Shah, Munil (December 1999). "Protocol Description". Multicast Address Dynamic Client Allocation Protocol. Thanks to Rajeev Byrisetty, Steve Deering, Peter Ford, Mark Handley, Van Jacobson, David Oran, Thomas Pfenning, Dave Thaler, Ramesh Vyaghrapuri and the participants of the IETF. IETF. p. 6. sec. 2.0. doi:10.17487/RFC2730. RFC 2730. Retrieved 2016-08-28.
... A reserved port number dedicated for MADCAP is used on the server (port number 2535, as assigned by IANA). Any port number may be used on client machines. ...
- ^ Hanna, Stephen R.; Patel, Baiju V.; Shah, Munil (December 1999). "Protocol Overview". Multicast Address Dynamic Client Allocation Protocol. Thanks to Rajeev Byrisetty, Steve Deering, Peter Ford, Mark Handley, Van Jacobson, David Oran, Thomas Pfenning, Dave Thaler, Ramesh Vyaghrapuri and the participants of the IETF. IETF. p. 3. sec. 1.5. doi:10.17487/RFC2730. RFC 2730. Retrieved 2016-08-28.
... All messages are UDP datagrams. ...
- ^ "Service Name and Transport Protocol Port Number Registry". Iana.org. Retrieved 2019-04-08.
- ^ "DocCommentXchange". sybase.com. Retrieved 27 February 2017.
- ^ "Service Name and Transport Protocol Port Number Registry". Iana.org. Retrieved 2013-10-26.
- ^ "Overview". XBT Tracker. SourceForge. n.d. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... XBT Tracker listens on port 2710. ...
- ^ "Overview". XBT Tracker. SourceForge. n.d. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... An experimental UDP tracker extension is also supported via announce URL udp://...:2710
. ...
- ^ "Online networking games for STK". GitHub. Retrieved 2024-01-06.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2024-10-10.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2024-10-10.
- ^ a b c d "Ports Used by I2P". I2P. December 2015. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
- ^ "IANA Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Getting Started with Rails". Ruby on Rails. 2012-03-21. Retrieved 2014-05-27.
- ^ "Documentation – Meteor". meteor.com. Retrieved 16 March 2015.
- ^ "What Ports And Protocols Are Used By Sync?". Sync Help Center. Resilio. 2016-08-28. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... Connecting to the tracker server for automatic peer discovery: TCP and UDP, port 3000 ...
- ^ "Create React App Getting Started". Create React App. September 2021. Retrieved 2021-12-04.
- ^ Gogs. "Troubleshooting – Gogs". Gogs. Retrieved 6 January 2021.
- ^ "Configure Grafana". Grafana Labs.
- ^ "Application Research Center". applipedia.paloaltonetworks.com.
- ^ "Firewall and connection requirements for the BlackBerry Enterprise Server, BlackBerry Device Service, and Universal Device Service". Blackberry Knowledge Base (published 2016-05-19). 2015-08-15. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... On the firewall, verify that port 3101 is open for outbound initiated, bi-directional Transmission Control Protocol (TCP) traffic. ...
- ^ "Squid configuration directive http_port". Squid Documentation (published 2013-05-09). n.d. Archived from the original on 2016-08-28. Retrieved 2016-08-28.
... Squid normally listens to port 3128 ...
- ^ "Eggdrop.conf". Eggdrop Wiki. Archived from the original on 2014-02-23. Retrieved 2014-02-20.[user-generated source]
- ^ "CruiseControl.rb – Getting Started". thoughtworks.com. Retrieved 2014-05-27.
- ^ a b "OpenOCD – Server Configuration". openocd.org. Retrieved 2022-05-18.
- ^ "Change the listening port for Remote Desktop on your computer". Microsoft. 2011-05-04. Retrieved 2014-05-27.
- ^ a b Matthews, Philip; Rosenberg, Jonathan; Wing, Dan; Mahy, Rohan (October 2008). "RFC 5389: Session Traversal Utilities for NAT (STUN)". IETF. RFC 5389. Retrieved 2014-05-27.
- ^ a b Mahy, R.; Matthews, P.; Rosenberg, J. (2010). "RFC 5766 – Traversal Using Relays around NAT (TURN): Relay Extensions to Session Traversal Utilities for NAT (STUN)". ietf.org. doi:10.17487/RFC5766. S2CID 17152616. Retrieved 16 March 2015.
- ^ a b MacDonald, Derek C.; Lowekamp, Bruce B. (May 2010). "Port Numbers and SRV Registry". NAT Behavior Discovery Using Session Traversal Utilities for NAT (STUN). Thanks to Dan Wing, Cullen Jennings, and Magnus Westerlund for detailed comments. IETF. p. 25. sec. 9.2. doi:10.17487/RFC5780. RFC 5780. Retrieved 2017-07-28.
... By default, the STUN NAT Behavior Discovery usage runs on the same ports as STUN: 3478 over UDP and TCP, and 5349 for TCP over TLS. ...
- ^ "Security guide for Microsoft Teams". Microsoft Learn. Microsoft. 25 July 2023. Retrieved 31 July 2023.
- ^ a b "Test Internet Connection". PlayStation 4 User's Guide. n.d. Archived from the original on 2017-04-09. Retrieved 2017-04-09.
... refer to the port numbers listed below, which are used when you connect your PS4 system to a PlayStation Network server.- TCP: 80, 443, 3478, 3479, 3480
- UDP: 3478, 3479
...
- ^ "Using Microsoft Outlook Express with Your Email". Help.godaddy.com. 2013-09-18. Retrieved 2013-10-08.
- ^ "APCUPSD User Manual". www.apcupsd.org. 2016-05-31. Retrieved 2021-08-22.
- ^ "TCP/IP Ports Used by SAP Applications" (PDF). archive.sap.com. 2009-04-09. Archived from the original (PDF) on 2021-08-20. Retrieved 2021-08-20.
- ^ a b Touch, J., Lear, E., Kojo, M., Ono, K., Stiemerling, M., Eddy, W., Trammell, B., Iyengar, J., Scharf, M., Tuexen, M., Kohler, E., & Nishida, Y. (May 24, 2022). "Service name and Transport Protocol Port Number Registry". www.iana.org. Retrieved May 25, 2022.
{{cite web}}
: CS1 maint: multiple names: authors list (link) - ^ "CimTrak Integrity Suite | Cimcor".
- ^ "IBM U2 product family". IBM. 2009-10-01. Archived from the original on June 12, 2008. Retrieved 2014-05-27.
- ^ a b c "EDU-120: Panorama Design, Troubleshooting". paloaltonetworks.csod.com. Palo Alto Networks. Retrieved 9 September 2020.
- ^ "Manual chat". tintin.mudhalla.net.
- ^ "IETF Draft of the Minger Email Address Verification Protocol". IETF. Retrieved 2014-05-27.
- ^ "Breaking the Echo Dot project for the IASC 4580 Capstone Course". James Autry on Github. 15 May 2021.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2023-07-02.
- ^ "Service Name and Transport Protocol Port Number Registry". Iana.org. Retrieved 2013-10-08.
- ^ "Couch-Potato-Server/Network.java at master · rarcher/Couch-Potato-Server". GitHub.
- ^ "Install and Run NATS Server". Archived from the original on 2021-02-25. Retrieved 2016-02-26.
- ^ a b "Configuration of Orthanc". Orthanc Book. 2017 [2015]. Archived from the original on 2017-02-12. Retrieved 2017-02-12.
... The default configuration file would: - Create a DICOM server with the DICOM AET (Application Entity Title)
ORTHANC
that listens on the port 4242. - Create a HTTP server for the REST API that listens on the port 8042.
...
- ^ "First steps with Docker". Archived from the original on 2014-02-19.
- ^ a b c d "Opening ports for Viber Desktop". Viber. Viber Media S.à r.l. Archived from the original on 19 September 2016. Retrieved 13 June 2016.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2016-03-28.
- ^ Williamson, S.; Kosters, M.; Blacka, D.; Singh, J.; Zeilstra, K. (1997). "RFC 2167, Referral Whois (RWhois) Protocol". IETF. doi:10.17487/RFC2167. Retrieved 2014-05-27.
- ^ "Can't Exploit Machines? A Metasploit Troubleshooting How To". Rapid7. June 2012. Retrieved 2020-07-07.
- ^ Franke, D.; Sibold, D.; Teichel, K.; Dansarie, M.; Sundblad, R. (2020). "RFC 8915, Network Time Security for the Network Time Protocol". Tools.ietf.org. doi:10.17487/RFC8915. Retrieved 2024-10-10.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ a b c "eMule Ports". Emule-project.net. 2007-05-16. Retrieved 2014-05-27.
- ^ "Port Details – Port 4728". SANS.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2023-07-02.
- ^ "Get the DSL Information from the Vigor130 on WAN". Support. DrayTek. Archived from the original on 2020-04-07. Retrieved 2020-04-07.
- ^ "FlightGear Howto: Multiplayer". flightgear.org. Retrieved 2014-05-27.[user-generated source]
- ^ "Configuring a registry". Docker Registry. Docker, Inc. Archived from the original on 2018-11-19. Retrieved 2019-01-14 – via Docker Documentation.
... When using Let's Encrypt, ensure that the outward-facing address is accessible on port 443
. The registry defaults to listening on port 5000
. ...
- ^ "PEG Specifications" (PDF). Michigan Inter-governmental Trade Network. Jan 2015. Archived from the original (PDF) on 2017-06-08. Retrieved 8 June 2017.
... TCP port 5000 shall be configured and open inbound through firewalls to the encoder. ...
- ^ RidgeRun (3 March 2022). "Python API". GStreamer Daemon. RidgeRun, LLC. – via RidgeRun Documentation.
... pygstc.gstc module ...
- ^ "Why is Control Center on Monterey … | Apple Developer Forums". developer.apple.com. Retrieved 2021-10-27.
- ^ "Configuring the proxy server – AWS Elastic Beanstalk". docs.aws.amazon.com.
By default, Elastic Beanstalk configures the proxy to forward requests to your application on port 5000.
- ^ Picture of Horse (2017-07-18). "Troubleshooting Connection Issues". Riot Games Support. Riot Games. Port forwarding. Archived from the original on 2017-08-10. Retrieved 2017-08-10.
... Now you must create an entry for each of the port ranges listed on the previous page. ... 5000 – 5500 UDP (League of Legends Game Client) ...
- ^ "Skaffa åtkomst med ASSA ABLOY" (PDF). www.assaabloy.com. Archived from the original on August 21, 2010.
- ^ a b Hill, Graham; Spiro, Jason, eds. (3 April 2012). "Nmap indicates that "telepathstart" and "telepathattack" are listening on ports 5010 and 5011 of my Linux box. What are these?". IT Security Stack Exchange. Stack Exchange, Inc. Answer by Graham Hill. Retrieved 2012-07-13.
- ^ a b "Configure the Windows Firewall to Allow SQL Server Access". Microsoft SQL Server. Microsoft. Retrieved 2022-08-29.
- ^ "Symantec Intruder Alert product support". Symantec. Archived from the original on April 14, 2017. Retrieved 2014-05-27.
- ^ RFC 5923. sec. 1. doi:10.17487/RFC5923.
- ^ a b "EPICS R3.14 Channel Access Reference Manual". www.aps.anl.gov.
- ^ Camarillo, Gonzalo; Ott, Joerg; Drage, Keith (November 2006). The Binary Floor Control Protocol (BFCP). IETF. doi:10.17487/RFC4582. RFC 4582. Retrieved 2017-12-13.
- ^ a b "pvAccess Protocol Specification". github.com.
- ^ a b "PVA Network Configuration". epics-base.github.io.
- ^ "IBM Tivoli Netcool/Impact". IBM. Archived from the original on June 16, 2008. Retrieved 2014-05-27.
- ^ Williamson, S.; Kosters, M.; Blacka, D.; Singh, J.; Zeilstra, K. (1997). "RFC 2107, Ascend Tunnel Management Protocol". IETF. doi:10.17487/RFC2167. Retrieved 2014-05-27.
- ^ "Port 5172 (tcp/udp)". Retrieved 2016-07-25.
- ^ https://vitejs.dev/ [bare URL]
- ^ Donaghey, River (2017-12-15). "Rest in Peace, AIM". Vice. Vice Media. Archived from the original on 2018-01-08. Retrieved 2018-04-19.
... Beloved online chat app AOL Instant Messenger died on Friday, USA Today reports. It was 20 years old. ...
- ^ a b Saint-Andre, P. (2004). Saint-Andre, P (ed.). "RFC 3920, Extensible Messaging and Presence Protocol (XMPP): Core". Tools.ietf.org. doi:10.17487/RFC3920. Retrieved 2014-05-27.
- ^ a b Saint-Andre, P. (2003-12-13). "RFC 6120, Extensible Messaging and Presence Protocol (XMPP): Core". IETF. doi:10.17487/RFC6120. Retrieved 2014-05-27.
- ^ "Service Name and Transport Protocol Port Number Registry". Internet Assigned Numbers Authority. Retrieved 1 January 2024.
- ^ "Service Name and Transport Protocol Port Number Registry". Internet Assigned Numbers Authority. Retrieved 1 January 2024.
- ^ "CVE-2000-0893". Retrieved 1 January 2024.
- ^ "Distributed GL Daemon (DGLD) allows attackers to identify IRIX systems". Archived from the original on 19 May 2023. Retrieved 1 January 2024.
- ^ "SGI graphics Frequently Asked Questions (FAQ)". Archived from the original on 10 June 2021. Retrieved 1 January 2024.
- ^ "Android Enterprise Network Requirements – Android Enterprise Help". support.google.com. Retrieved 6 May 2023.
- ^ a b Calhoun, P.; Montemurro, M.; Stanley, D. (2008-11-10). Calhoun, P; Montemurro, M; Stanley, D (eds.). "RFC 5415, Control And Provisioning of Wireless Access Points (CAPWAP) Protocol Specification". IETF. doi:10.17487/RFC5415. Retrieved 2014-05-27.
- ^ Paterson, Ian; Smith, Dave; Saint-Andre, Peter; Moffitt, Jack; Stout, Lance; Tilanus, Winfried (16 November 2016). "Bidirectional-streams Over Synchronous HTTP (BOSH)". xmpp.org.
- ^ "XEP-0124: Bidirectional-streams Over Synchronous HTTP (BOSH) with SSL". Xmpp.org. Retrieved 2014-05-27.
- ^ "XEP-0174: Serverless Messaging". Xmpp.org. Retrieved 2014-05-27.
- ^ "Service Name and Transport Protocol Port Number Registry". IANA. Retrieved 2022-10-15.
- ^ Schaad, Jim (November 2011). "New Section 9.2 – "Subject Information Access"". Certificate Management over CMS (CMC) Updates. IETF. p. 11. sec. 2.11. doi:10.17487/RFC6402. RFC 6402. Retrieved 2018-08-14.
... If CMC services are available using TCP/IP, the dNSName or iPAddress name forms MUST be used. Since the GeneralName data structure does not permit the inclusion of a port number, in the absence of other external configuration information, the value of 5318 should be used. (The port registration is in Section 3.2.) ...
- ^ "Kega Fusion Mini-Manual". arcadezone.org. Niobium's Arcade Zone. 2010-01-16. Archived from the original on October 29, 2013. Retrieved 2013-10-26.
- ^ "Kega Fusion Mini-Manual". gamingpwnage.webs.com. GamingPwnage. Archived from the original on October 29, 2013. Retrieved 2013-10-26.
- ^ Miller, Kenneth; Robertson, Kary; Tweedly, Alex; White, Marc (April 1998). "MFTP Architecture". StarBurst Multicast File Transfer Protocol (MFTP) Specification. Acknowledgements to Scott Bradner, Ken Cates, and Tony Speakman. IETF. p. 10. sec. 3. I-D draft-miller-mftp-spec-03. Retrieved 2017-05-19.
... IANA has assigned UDP port 5402 for MFTP. Certain MFTP messages must be sent to this port because it will be the only port number known both to the sender (Server) and the receivers (Clients). ...
- ^ "Use IT Group – Bouwsoft – Groensoft". Bouwsoft.be. Retrieved 2013-10-08.
- ^ "Port 5450 Details". SpeedGuide.net. Retrieved 2021-02-05.
- ^ "Port 5457 Details". SpeedGuide.net. Retrieved 2021-02-05.
- ^ Speedguide. "Port 5458 Details". Speedguide. SpeedGuide.net. Retrieved 2021-02-05.
- ^ "Firewall Configuration to Allow Client – Server Comms". Schneider Electric Resource Center. Archived from the original on 7 December 2015. Retrieved 26 November 2015.
- ^ "Port Numbers". Docs.oracle.com. Retrieved 2013-10-26.
- ^ ANSI E1.17-2010
- ^ "Access Kibana | Kibana Guide [7.14] | Elastic". www.elastic.co. Retrieved 2021-09-02.
- ^ "pcAnywhere IP port usage". Symantec. Archived from the original on 2018-06-21. Retrieved 2017-04-18.
- ^ "How to change the IP ports that pcAnywhere uses". Symantec. Archived from the original on 2017-04-19. Retrieved 2017-04-18.
- ^ a b "AMQP URI Specification". www.rabbitmq.com. GoPivotal, Inc. 2013.
- ^ "n8n docs".
- ^ "Neighbor discovery - RouterOS - MikroTik Documentation".
- ^ "Manual:IP/Services - MikroTik Wiki". wiki.mikrotik.com. Retrieved 2024-02-22.
- ^ "NCPA Configuration".
- ^ "Hazelcast 3.9 Reference Manual". docs.hazelcast.org. Retrieved 2017-11-27.
- ^ "Technet: Using a Firewall with Operations Manager 2007". Microsoft. 13 May 2011.
- ^ "Troubleshooting ProjectWise Gateway or Connection Server [TN] – Content Management Wiki – Content Management – Bentley Communities". Retrieved 2017-09-20.
- ^ "VNC Frequently Asked Questions (FAQ): Q53 Which TCP/IP ports does VNC use?". AT&T Laboratories Cambridge. 1999. Archived from the original on 2012-04-05. Retrieved 2013-08-29.
- ^ "TeamViewer 8 Manual Remote Control" (PDF). www.teamviewer.com. TeamViewer GmbH. 2012. p. 68. Retrieved 2013-08-30.
- ^ a b "Enter-PSSession". www.technet.com. Microsoft TechNet. 2013. Retrieved 2013-10-31.
- ^ a b "How To: Configure WINRM for HTTPS". Retrieved 2019-04-16.
- ^ "vSphere Documentation Center". vmware.com. Retrieved 16 March 2015.
- ^ a b c "Tigermeeting Admin User Manual". Tigermeeting AB. Retrieved 2024-04-01.
- ^ J. Gross; I. Ganga; T. Sridhar, eds. (November 2020). Geneve: Generic Network Virtualization Encapsulation. Internet Engineering Task Force. doi:10.17487/RFC8926. ISSN 2070-1721. RFC 8926. Proposed Standard.
- ^ "Server Configuration". ObjectDB 2.6 Developer's Guide. n.d. Chapter 6. Archived from the original on 2016-11-21. Retrieved 2016-11-21.
... The port attribute specifies a TPC [sic] port on which the server is listening for new connections. Usually the default port 6136
should be specified. ...
- ^ "Ports and Protocols". Kubernetes. Retrieved 2021-11-27.
- ^ "Discord API Docs for Bots and Developers". Discord. Retrieved 2017-12-23.
- ^ Fuyou, Miao; Yuzhi, Ma; Salowey, Joseph A. (2008-11-10). "Transport Layer Security (TLS) Transport Mapping for Syslog". IETF. RFC 5424. Retrieved 2014-05-27.
- ^ Mosberger, David (20 Apr 2009). "SANE Unix man page". SANE – Scanner Access Now Easy.
- ^ "OpenFlow Switch Errata v1.0.2-rc1" (PDF). Open Networking Foundation. 2013-10-04.
- ^ "VBAN Protocol Specifications" (PDF). VB-Audio. Retrieved 3 October 2023.
- ^ Worldwide. "Application-Oriented Networking – Cisco Systems". Cisco.com. Retrieved 2014-05-27.
- ^ "WebClientAuthenticatedSessionIDs – FAHClient". stanford.edu. Retrieved 2014-05-27.[user-generated source]
- ^ "The Neo4J Manual Chapter 27. Web Interface". Archived from the original on 2014-10-16. Retrieved 2014-06-12.
- ^ "Open iT FAQs: What are the default port server of Open iT?". Retrieved 2017-02-28.
- ^ Wood, Lloyd; Eddy, Wesley M.; Smith, Charles; Ivancic, Will; Jackson, Chris (November 2016). Saratoga: A Scalable Data Transfer Protocol. Contributions by James H. McKim et al. (section 10 "Acknowledgements", p. 52). IETF. I-D draft-wood-tsvwg-saratoga-20. Retrieved 2017-03-27.
... Saratoga is a file transfer and content delivery protocol ... IANA has allocated port 7542 (tcp/udp) for use by Saratoga. ...
- ^ Wood, Lloyd; Eddy, Wesley M.; Ivancic, Will; McKim, Jim; Jackson, Chris (13–14 September 2007). Saratoga: a Delay-Tolerant Networking convergence layer with efficient link utilization. 2007 International Workshop on Space and Satellite Communications. Salzburg: IEEE. pp. 168–172. doi:10.1109/IWSSC.2007.4409410. ISBN 978-1-4244-0938-9.
... Saratoga is a rate-based UDP file transfer protocol capable of transferring large files. Saratoga has been in operational use since 2004 to move mission imaging data from the Disaster Monitoring Constellation (DMC) remote-sensing satellites to ground stations. ...
- ^ "Delivery Optimization for Windows 10 updates". Microsoft Docs. 2020. Archived from the original on 2020-04-08. Retrieved 2020-04-14.
... Delivery Optimization listens on port 7680. ...
- ^ "Smartlaunch 4.1 Cyber Cafe Management Software Product Overview" (PDF). Archived from the original (PDF) on 2013-03-11. Retrieved 2014-05-27.
- ^ "Powerschool Network Port Configuration". Retrieved 2024-09-11.
- ^ "How to create a YSF Server, step by step guide". forum.ysfhq.com. YSFlight Headquarters. 2011-08-06. Retrieved 2013-10-26.
- ^ "Flex 3 – Adobe Flex 3 Help". adobe.com. Archived from the original on 2012-07-07. Retrieved 2014-05-27. Alt URL
- ^ "Icecast 2.4.1 Docs — Config File". Retrieved 2023-09-13.
- ^ "Running DynamoDB on Your Computer". Amazon DynamoDB – Developer Guide (API Version 2012-08-10 ed.). Amazon Web Services. n.d. Archived from the original on 2016-10-24. Retrieved 2016-10-24.
... DynamoDB uses port 8000 by default. ...
- ^ "Writing your first Django app". Django documentation (1.10 ed.). Django Software Foundation. 2016. Archived from the original on 2016-10-24. Retrieved 24 July 2016.
... By default, the runserver
command starts the development server on the internal IP at port 8000. ...
- ^ "cpython/server.py". GitHub. Retrieved 2022-05-16.
- ^ "About Client Settings". docs.microsoft.com. Retrieved 2022-05-11.
- ^ a b "AppAssure 5 Firewall Port Requirements". AppAssure (Knowledge Base). Dell (published 2012-10-23). 2012-10-01. Archived from the original on 2013-01-22. Retrieved 2017-02-12.
- ^ "Proxmox VE Firewall – Ports used by Proxmox VE". pve.proxmox.com. Retrieved 2020-05-24.
- ^ a b "FAQ". matrix.org. Retrieved 2019-05-27.
- ^ a b "OpenERP Web Installation". OpenERP Documentation (5.0 ed.) (published 2017-02-12). n.d. Archived from the original on 2017-02-12. Retrieved 2017-02-12.
... port is the OpenERP server port which is by default 8070 for NET-RPC or 8069 for XML(S)-RPC. The web server itself listens by default on port 8080 ...
- ^ Brittain, Jason; Darwin, Ian F (2007). "Changing the Port Number from 8080". Tomcat: The Definitive Guide. Sebastopol, CA, US: O'Reilly. ISBN 9780596101060. OCLC 180989275. Retrieved 2018-10-18.
Tomcat, in a default installation, is configured to listen on port 8080 rather than the conventional web server port number 80. ...
- ^ "Changing JIRA application TCP ports". Administering JIRA applications 7.1. n.d. Archived from the original on 2017-02-12. Retrieved 2017-02-12.
... By default, JIRA applications use TCP listening port 8080 and hence, JIRA applications are typically available at http://<yourserver>:8080
. ...
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Administering HDFS". docs.cloudera.com.
- ^ "web.conf". Splunk Enterprise Admin Manual (6.6.3 ed.). Splunk. n.d. Archived from the original on 2017-08-23. Retrieved 2017-08-23.
... The following are the spec and example files for web.conf
. ... Location of splunkd
. ... Defaults to 127.0.0.1:8089
. ...
- ^ "How is the FRITZ!Box protected from attacks against port 8089?". AVM. 2016-02-05. Archived from the original on 2017-07-12. Retrieved 2017-07-06.
... The FRITZ!Box supports the TR-069 protocol ... If necessary, the service provider's Auto Configuration Server (ACS) contacts the FRITZ!Box over TCP port 8089 using a URI (Uniform Resource Identifier) that was previously negotiated. ...
- ^ "Change listen port for Confluence". Confluence Server documentation (6.0 ed.). Retrieved 2017-02-12.
... If you see this error: ... This means you are running other software on Confluence's default port of 8090. ...
- ^ "Frequently asked questions". Coral Content Distribution Network Wiki. n.d. Archived from the original on 2017-02-12. Retrieved 2017-02-12.
... you can now access CoralCDN through ports 80, 8080, and 8090. ...
- ^ a b "Network Configuration". CouchBase Developer Portal. 2017. Archived from the original on 2017-02-12. Retrieved 2017-02-12.
- ^ a b "Networking | Documentation – Jellyfin Project". jellyfin.org. Retrieved 2021-08-29.
- ^ "Signum Node". January 7, 2023 – via GitHub.
- ^ "Remote Administration for IIS Manager". iis.net. Retrieved 16 March 2015.
- ^ "Bloomberg Network Connectivity Guide" (PDF). Bloomberg News. 2022. Retrieved 7 October 2022.
- ^ a b "VMware Server 2.0 RC 2 Release Notes". VMware Documentation. VMware (published 2008-08-26). 2008-08-19. Archived from the original on 2017-09-06. Retrieved 2017-09-04.
... The default VI Web Access HTTP connection port is 8222 and the default HTTPS port is 8333. ...
- ^ "jBASE Connectivity Server (jRCS)". rocketsoftware.com. 2023-02-15. Retrieved 2023-02-20.
- ^ a b "Apache Synapse". apache.org. 2012-01-06. Retrieved 2014-05-27.
- ^ "Remote Access Update API – CheckIP Tool FAQ". dyn.com. Retrieved 2015-08-21.
- ^ "MikroTik Wiki "IP/Services" page". MikroTik. 2014-01-02. Archived from the original on 2014-06-28. Retrieved 2014-06-23.[user-generated source]
- ^ "Bitcoin – Open source P2P money". bitcoin.org.
- ^ "Are ISPs Intentionally Blocking Bitcoin?".
- ^ "Filestash server".
- ^ "Enabling the inbound firewall rule for a master VDFS service – VisualSVN Help Center". visualsvn.com. 12 September 2014. Retrieved 16 March 2015.
- ^ https://documentation.commvault.com/commvault/v11/article?p=8572.htm [bare URL]
- ^ "SLIP-0044: Add Chia/XCH at 8444 by hoffmang9 · Pull Request #1010 · satoshilabs/slips". GitHub. Retrieved 2023-07-23.
- ^ Configuring and Administering Adobe ColdFusion 10 (PDF). Adobe (published 2012-09-07). n.d. pp. 2, 5, 29, 95, 150–151. Archived (PDF) from the original on 2013-02-02. Retrieved 2016-10-24.
... The ColdFusion server configuration is built on top of Tomcat, also called the built-in web server. ... By default in the server configuration, the built-in web server listens on port 8500. ...
- ^ a b "How to Configure a Firewall for Software Updates". Microsoft TechNet. n.d. Archived from the original on 2016-10-24. Retrieved 2016-10-24.
... By default, a WSUS server that is configured for the default Web site uses port 80 for HTTP and port 443 for HTTPS. By default, the WSUS server uses port 8530 for HTTP and port 8531 for HTTPS if it is using the WSUS custom Web site. ...
- ^ a b "Step 3: Configure WSUS". Deploy Windows Server Update Services in Your Organization. n.d. Archived from the original on 2016-10-24. Retrieved 2016-10-24.
... WSUS upstream and downstream servers will synchronize on the port configured by the WSUS Administrator. By default, these ports are configured as follows: - On WSUS 3.2 and earlier, port 80 for HTTP and 443 for HTTPS
- On WSUS 6.2 and later (at least Windows Server 2012), port 8530 for HTTP and 8531 for HTTPS
...
- ^ "Creating an OCR configuration". Symantec. Symantec. Archived from the original on July 28, 2021. Retrieved 28 July 2021.
- ^ "RPC Overview | Chia Documentation". docs.chia.net. Retrieved 2023-07-23.
- ^ Ohling, Freerk; Varley Jamieson, Helen; Rastapopoulos, Roberto; Schoen, Seth; booki; et al. (2011). "Freegate". How to Bypass Internet Censorship. FLOSS Manuals. 22. Archived from the original on 2016-10-24. Retrieved 2016-10-24.
... Freegate is a proxy tool ... If you want to use another application with Freegate ... you will have to configure them to use Freegate as a proxy server. ... the port is 8580. ...
- ^ "What Ports Does Wavestore Use For Communication". Retrieved 24 July 2024.
- ^ "Service Name and Transport Protocol Port Number Registry". IANA. Retrieved 25 July 2023.
- ^ "Planning your network topology". Lotus Notes Traveler 8.5.1 documentation. IBM (published 2010-07-01). n.d. Retrieved 2016-10-25.
- ^ "Network calculations". Ultra Fractal manual. Frederik Slijkerman. n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... Ultra Fractal enables you to distribute calculations over multiple computers connected with a network. ... Ultra Fractal uses the TCP/IP protocol for network calculations, ...
- ^ "Network servers". Ultra Fractal manual. Frederik Slijkerman. n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... To be able to connect to a remote computer, Ultra Fractal must be running in server mode ... By default, the server listens on port 8691 for connections ...
- ^ "Internet Archive dWeb Transport". GitHub. 24 March 2021.
- ^ "Change Defazult Port to 8765 · amark/gun@d65e2c3". GitHub. Retrieved 2018-09-27.
- ^ "Which ports does the TeamSpeak 2 server use?". Support. TeamSpeak. n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
- ^ Nessus 6.8 User Guide (PDF). Tenable Network Security (published 2017-06-27). n.d. p. 28. Archived (PDF) from the original on 2017-07-06. Retrieved 2017-07-06.
... The Nessus UI uses port 8834. ... By default, Nessus is installed and managed using HTTPS and SSL, uses port 8834 ...
- ^ Vaughan-Nichols, Steven J. (2009-06-18). "First look: Opera Unite alpha lets you share files – but is it safe?". Networking. Computerworld. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... Unite is both a Web browser and a Web server. With the included JavaScript applets, ... To make this happen, your PC and its Internet connection have to have port 8840 open. ...
- ^ The How-To Geek (2010-02-15). "How to Share Large Files Over the Internet with Opera Unite". Lifehacker. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... Unite automatically hooks into your router using uPnP to dynamically open port 8840, but it can also use a Unite proxy server when you're behind a more restrictive firewall ...
- ^ "Use of CDDB service in your software". CDDB Inc. 1998-09-28. Archived from the original on 2016-10-25. Retrieved 2016-10-25 – via Department of Engineering Science, University of Oxford.
... CDDB (CD database) is an information database containing artist, disc title, track titles, and other information for digital audio compact discs. ... There are two forms of remote access to CDDB servers, CDDBP and HTTP. All current CDDB servers answer either at IP port 888 or 8880 for CDDBP and port 80 for HTTP access. ...
- ^ "Port number settings in WebSphere Application Server versions". WebSphere Application Server – Express, Version 8.0 documentation. IBM (published 2016-07-25). n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
- ^ "Frequently Asked Questions". MQTT. n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... TCP/IP port 1883 is reserved with IANA for use with MQTT. TCP/IP port 8883 is also registered, for using MQTT over SSL. ...
- ^ Banks, Andrew; Gupta, Guhan, eds. (2015-12-10). "Network Connections". MQTT Version 3.1.1 (Plus Errata 01 ed.). OASIS. 4.2. Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... TCP ports 8883 and 1883 are registered with IANA for MQTT TLS and non TLS communication respectively. ...
- ^ Ivanov, Paul; et al. (2015-09-25). "Running a notebook server". In Baecker, Arnd (ed.). IPython Documentation (3.2.1 ed.). Archived from the original on 2016-10-25. Retrieved 2016-10-25.
... The IPython notebook web-application is based on a server-client structure. ... By default, a notebook server runs on http://127.0.0.1:8888/ and is accessible only from localhost
. ...
- ^ "Running the Notebook". Jupyter Documentation (Latest ed.). n.d. Archived from the original on 2016-10-25. Retrieved 2016-10-25 – via Read the Docs.
... By default, the notebook server starts on port 8888. If port 8888 is unavailable or in use, the notebook server searches the next available port. ...
- ^ a b "Change MAMP to Default Apache and MySQL ports". OS X Daily. 2010-09-16. Retrieved 2018-04-19.
- ^ "Running Solr". Apache Solr Reference Guide 6.6. Apache Software Foundation. c. 2017. Archived from the original on 2017-06-30. Retrieved 2017-06-30.
... If you didn't start Solr after installing it, you can start it by running bin/solr
from the Solr directory. ... This will start Solr in the background, listening on port 8983. ...
- ^ Gaudin, Olivier. "SonarQube Installation Instructions". codehaus.org. Archived from the original on May 12, 2014. Retrieved 2014-05-27.
- ^ "Play2 Documentation". Playframework.com. Retrieved 2014-05-27.
- ^ "How to use qBittorrent as a tracker". GitHub. Retrieved 27 June 2015.[user-generated source]
- ^ ETL Electronics Archived January 4, 2012, at the Wayback Machine
- ^ "Xdebug Documentation – All Settings". xdebug.com. Retrieved 2023-09-11.
- ^ "Kafka 0.11.0 Documentation". Apache Kafka. Retrieved 2017-09-01.
- ^ "Prometheus/Snmp_exporter". GitHub.
- ^ "RESTful API with JSON over HTTP". Elasticsearch. Retrieved 2015-04-04.
- ^ "Node.js — Debugging Node.js".
- ^ "PS3 - Using remote play (via the Internet)". Manuals.playstation.net. 2013-09-13. Retrieved 2013-10-08.
- ^ "IBM Support - Which ports need to be open for Cognos Analytics to communicate across servers and do they need to be opened bi-directionally?". ibm.com. 15 February 2023. Retrieved 2024-06-01.
- ^ "Transferring data using Wi-Fi". Manuals.playstation.net. Retrieved 2013-10-08.
- ^ a b c d e Konopelko, Piotr Robert (2016-08-04). Kruszona-Zawadzka, Agata (ed.). MooseFS 3.0 User's Manual (PDF) (1.0.4 ed.). pp. 11, 19–23, 58, 62, 74–76. Archived (PDF) from the original on 2016-08-30. Retrieved 2016-08-30.
- ^ "VGG Image Search Engine (VISE)".
- ^ "BOLT #1: Base Protocol". GitHub. Retrieved 11 November 2021.
- ^ a b StunlockStudios/vrising-dedicated-server-instructions, Stunlock Studios, 2024-07-13, retrieved 2024-07-13
- ^ "Tripwire Enterprise 8". Nvd.nist.gov. Archived from the original on September 23, 2013. Retrieved 2013-10-08.
- ^ a b Bergkvist, Christoffer (2012-08-02). "Install and initial setup". Tvheadend. Archived from the original on 2016-09-27. Retrieved 2016-09-27.
... Tvheadend listens to the following TCP ports by default: - 9981 – HTTP server (web interface)
- 9982 – HTSP server (Streaming protocol)
...
[user-generated source] - ^ a b c "Documentation for Teamspeak Docker container". Retrieved 2020-07-26.
- ^ Worldwide. "Github". github.com. Retrieved 2020-12-30.
- ^ a b "Port Forwarding". Vonage (published 2016-12-16). n.d. Retrieved 2017-12-13.
- ^ Schubotz, Moritz; Wicke, Gabriel (2014). "Mathoid: Robust, Scalable, Fast and Accessible Math Rendering for Wikipedia". In Watt, Stephen M.; Davenport, James H.; Sexton, Alan P.; Sojka, Petr; Urban, Josef (eds.). Intelligent Computer Mathematics. Lecture Notes in Computer Science. Vol. 8543. Cham: Springer International Publishing. pp. 224–235. arXiv:1404.6179. doi:10.1007/978-3-319-08434-3_17. ISBN 978-3-319-08434-3. ISSN 0302-9743. S2CID 16123116.
- ^ "Manual pages – F-PROT Antivirus Support – Unix". F-prot.com. Retrieved 2014-05-27.
- ^ a b "Manual pages – F-PROT Antivirus Support – Unix". F-prot.com. Retrieved 2014-05-27.
- ^ "GE Proficy HMI/SCADA – CIMPLICITY Input Validation Flaws Let Remote Users Upload and Execute Arbitrary Code". Retrieved 2016-05-10.
- ^ "ports and protocols used for DCS world". ED Forums. 10 October 2019. Retrieved 2022-05-17.
- ^ "network broadcast from bluestacks – Beacon-v1". Getsatisfaction.com. Archived from the original on April 19, 2014. Retrieved 2013-10-08.
- ^ "Octopus Deploy Documentation". March 2019.
- ^ "xcompute_service_assignment". IANA Records. Retrieved 2 May 2021.
- ^ John, Ted (2015-11-25). "Multiplayer". OpenRCT2 0.0.2 documentation. Archived from the original on 2017-04-26. Retrieved 2017-04-26.
... enter the hostname or IP address (and optionally a port if the server is not using the default OpenRCT2 port, 11753). ... configure your router to forward TCP connections on your chosen port (default is 11753) ...
- ^ "Authentication Flow". Second Life Wiki. 25 February 2008. Retrieved 26 July 2017.[user-generated source]
- ^ a b "LSL_HTTP_server". Second Life Wiki. 11 January 2014. Retrieved 26 July 2017.[user-generated source]
- ^ "GELF — Graylog 4.0.0 documentation". Archived from the original on 2017-08-09. Retrieved 2017-08-10.
- ^ a b "Network Connectivity for Enterprise Private Networks: Fifth Generation MakerBot 3D Printers". Retrieved 7 September 2020.
- ^ "Server". Cube World Wiki. 2013-07-17. Archived from the original on 2013-09-16. Retrieved 2013-10-08.[user-generated source]
- ^ "How to Access the Version 7 HMC Remotely". IBM. 2013-07-17. Retrieved 2014-09-05.
- ^ "Authentication Flow". 25 February 2008.
- ^ Scheduler-Usage. "Forums: Controlm-M Usage Forum Index -> Control-M Enterprise Manager". Scheduler-Usage. Archived from the original on May 2, 2013. Retrieved 2014-05-27.
- ^ "Multiplayer Connection Guide - Age of Wonders III". Archived from the original on 2019-05-13.
- ^ "Ports used by Kaspersky Security Center". support.kaspersky.com.
- ^ "Management Plugin". RabbitMQ. Pivotal Software. n.d. Archived from the original on 2017-09-23. Retrieved 2017-09-23.
... The Web UI is located at: http://server-name:15672/
... NB: The port for RabbitMQ versions prior to 3.0 is 55672. ...
- ^ "Mac OS X Server 10: Web service uses ports 80 and 16080 by default". apple.com. Archived from the original on 2008-01-08. Retrieved 2014-05-27.
- ^ "Scaling Redis". Redis Documentation. Retrieved 27 June 2024.
- ^ "IP Networking". spec.m17project.org. Archived from the original on 2022-12-08. Retrieved 2022-12-08.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ a b "Bedrock Dedicated Server". Minecraft Wiki. Retrieved 24 September 2023.[user-generated source]
- ^ a b c How do I allow my internal XMPP client or server to connect to the Talk service?, Google Code Help, accessed December 15, 2010.
- ^ "Systemd-journal-gatewayd.service".
- ^ "systemd-journal-remote.service". www.freedesktop.org.
- ^ "IETF Mesh Link Establishment". Ietf Datatracker. 2015-12-01. Retrieved 2022-02-21.
- ^ a b c "4D Server and port numbers". 4d.com. 2013-12-03. Archived from the original on 2014-04-08. Retrieved 2014-05-27.
- ^ http://playstarbound.com/ [bare URL]
- ^ http://www.flir.com/ [bare URL]
- ^ "WeatherLink Live".
- ^ http://www.tonido.com [bare URL]
- ^ "Tutorials/Setting up a server". Minecraft Wiki. Retrieved 24 September 2023.[user-generated source]
- ^ a b "Protocol – wiki.vg". wiki.vg. Retrieved 2016-11-07.[user-generated source]
- ^ "Query – wiki.vg". wiki.vg. Retrieved 2017-06-29.[user-generated source]
- ^ "RCON – wiki.vg". wiki.vg. Retrieved 2017-06-29.[user-generated source]
- ^ "Modifying License Manager Computer Ports for Windows Firewall – 2022 – SOLIDWORKS Installation Help". help.solidworks.com. Retrieved 2022-08-01.
- ^ "Networking introduction – collectd Wiki". Collectd.org. 2012-01-25. Retrieved 2013-10-08.[user-generated source]
- ^ a b c d e f "Required Ports for Steam". Support. Steam. Archived from the original on 2018-05-19. Retrieved 2018-05-19.
- ^ Kleinman, Sam; et al. "Default MongoDB Port". MongoDB 3.4 Manual. Reference. Archived from the original on 2017-11-10. Retrieved 2017-11-10.
- ^ "Rust Dedicated Server". Valve Developer Community (Revision 209464 ed.). Valve. 2017-06-22. Archived from the original on 2017-06-29. Retrieved 2017-06-29.[user-generated source]
- ^ "Rust Dedicated Server RCON". Valve Developer Community. Valve. 2017-06-22. Archived from the original on 2017-06-29.[user-generated source]
- ^ "Configuration". Cube 2: Sauerbraten – Documentation. Sauerbraten. n.d. Archived from the original on 2017-06-29. Retrieved 2017-06-29.
... Servers use the ports 28785 (UDP) and 28786 (UDP). ...
- ^ a b c Nintendo Wi-Fi Connection Instruction Booklet (PDF). Nintendo. n.d. p. 24. Archived (PDF) from the original on 2017-06-29.
...- TCP: Allow traffic to all destinations on ports: 28910, 29900, 29901, 29920, 80, and 443.
- UDP: Allow all traffic to all destinations. (Necessary for peer-to-peer connections and game play).
...
- ^ "Ports Used for Call of Duty Games". Activision Support. Activision. 2008–2016. Archived from the original on 2017-06-30. Retrieved 2017-06-30.
- ^ "Setting up a server – Mintest Wiki". Retrieved December 29, 2020.
- ^ "Foundry VTT Application Configuration". Retrieved November 19, 2021.
- ^ "Tutorials/Setting up a server – Fivem page". docs.fivem.net/docs/server-manual/setting-up-a-server/. Retrieved 2013-09-17.[user-generated source]
- ^ Knudsen, Kent (April 5, 2002). "Tracking the Back Orifice Trojan On a University Network". sans.org. p. 7. Archived from the original (PDF) on April 21, 2018. Retrieved April 20, 2018.
The server normally binds to UDP port 31337, but it may be configured to use another port.
- ^ Syngress (2003). Configuring Symantec AntiVirus Enterprise Edition. Elsevier. p. 6. ISBN 9780080476711. Retrieved April 20, 2018.
BO2K runs over any User Datagram Protocol (UDP) port but will default to using port 31337.
- ^ "ncat(1) — Linux manual page". Retrieved November 30, 2020.
- ^
boinc(1)
– Linux User Commands Manual - ^ Rocket UniVerse Installation Guide (Version 11.2.3) (PDF) (UNV-113-INST-1 ed.). Rocket Software. April 2014. pp. 3–8, 4–8.
... When you install UniVerse on your system for the first time, you must add the UniRPC daemon's port to the /etc/services
file. Add the following line to the /etc/services
file: uvrpc 31438/tcp # uvrpc port ...
- ^ "Immunet Protect 2.0 Requirements & Compatible Security Package List". Support. Immunet. 2010-05-12. Archived from the original on 2013-10-05. Retrieved 2016-10-18.
- ^ Pedersen (2012-03-24). "Manually Configure Ports In Your Firewall". Forum. Immunet. Archived from the original on 2016-10-18. Retrieved 2016-10-18.
- ^ "What network ports do I need to allow through my firewall?". Support (FAQ). Plex. n.d. Archived from the original on 2016-10-18. Retrieved 2016-10-18.
... TCP: 32400 (for access to the Plex Media Server) ...
- ^ Gallagher, Sean (2014-01-02). "Backdoor in wireless DSL routers lets attacker reset router, get admin". Ars Technica. Archived from the original on 2016-11-09. Retrieved 2016-11-09.
... A hacker has found a backdoor to wireless combination router/DSL modems ... The attack, confirmed to work on several Linksys and Netgear DSL modems ... the router responded to messages over an unusual TCP port number: 32764. ... the backdoor might affect wireless routers with DSL modems from SerComm, ...
- ^ "Which ports and protocols does LogMeIn Hamachi use?". Support. LogMeIn. n.d. Archived from the original on 2016-10-18. Retrieved 2016-10-18.
... - TCP 12975 (initiator port)
- TCP 32976 (session port)
If the above ports cannot be used to achieve a connection, Hamachi will try again using SSL (TCP 443). ...
- ^ Kawaguchi, Kohsuke; et al. (2007-05-06). "Remote access API". In Scheibe, René (ed.). Jenkins Wiki. Small contributions from various people. (published 2017-03-15). Archived from the original on 2017-05-19. Retrieved 2017-05-19.
... Jenkins instances listen on UDP port 33848. ...
{{cite encyclopedia}}
: CS1 maint: numeric names: authors list (link)[user-generated source] - ^ Kawaguchi, Kohsuke; et al. (2010-05-10). "Auto-discovering Jenkins on the network". Jenkins Wiki (published 2016-02-24). Archived from the original on 2016-10-18. Retrieved 2016-10-18.
... Jenkins listens on UDP port 33848. ...
[user-generated source] - ^ "Multiplayer". Factorio Wiki. Retrieved 2019-01-23.[user-generated source]
- ^ "Appendix B. Firewalls and default ports". OpenStack Configuration Reference. OpenStack Foundation. 2016-05-10. Archived from the original on 2016-10-18. Retrieved 2016-10-18.[self-published source]
- ^ "Service Name and Transport Protocol Port Number Registry". IANA. Retrieved 2024-04-21.
- ^ "3rd Generation Partnership Project; Technical Specification Group Radio Access Network; NG-RAN; NG Application Protocol (NGAP)". 3GPP. Retrieved 2024-04-21.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2023-07-02.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Checkout-free technology for frictionless stores". www.getzippin.com. 2022-09-15. Archived from the original on 2022-09-15.
- ^ https://makepro-x.com [bare URL]
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org.
- ^ "Create new ZeroNet site – ZeroNet". zeronet.readthedocs.io. Retrieved 2021-07-16.
- ^ "How do I set up exceptions in my firewall for RuneScape?". Support. RuneScape. n.d. Retrieved 2016-09-28.
... open the following ports; 443, 43594 and 43595 ...
- ^ "Service Name and Transport Protocol Port Number Registry". www.iana.org. Retrieved 2023-07-02.
- ^ "drive.web". drive.web. Retrieved 2022-10-27.
- ^ a b https://brainy-lab.com/ [bare URL]
- ^ Internet Assigned Numbers Authority (IANA) Procedures for the Management of the Service Name and Transport Protocol Port Number Registry. IETF. August 2011. doi:10.17487/RFC6335. RFC 6335.
- ^ Schaad, Jim; Myers, Michael (June 2008). "TCP-Based Protocol". Certificate Management over CMS (CMC): Transport Protocols. IETF. p. 4. sec. 5. doi:10.17487/RFC5273. RFC 5273. Retrieved 2017-11-10.
... When CMC messages are sent over a TCP-based connection ... There is no specific port that is to be used when doing TCP-based transport. Only the Private Ports 49152-65535 may be used in this manner (without registration). The ports in the range of 1-49151 [sic?] SHOULD NOT be used. ...
- ^ "TCP and UDP ports used by Apple software products". Apple Support. Retrieved 2024-05-26.
- ^ a b "The description of the S-Connect protocol". SOLAR controls s.r.o.
- ^ "Quick Start Guide". WireGuard. Retrieved 20 September 2022.
- ^ "AudioRelay - FAQ". Retrieved 17 October 2024.
- ^ "Mosh". mosh.org. Retrieved 2017-07-10.
- ^ https://activemq.apache.org/components/classic/documentation/getting-started [ URL básica ]
- ^ "Usbmux". Wiki del iPhone . Consultado el 8 de septiembre de 2024 .
- ^ "Archivo de configuración predeterminado del servidor Mumble Murmur: confirmación 73a0b2f". Repositorio de código fuente de Mumble . Github . Consultado el 29 de octubre de 2018 .[ fuente autopublicada ]
- Stretch, Jeremy. "Puertos comunes" (PDF) . PacketLife.net . Archivado (PDF) del original el 28 de marzo de 2018. Consultado el 9 de febrero de 2019 .
Lectura adicional
Enlaces externos