- A 1200 class train (front cab) at 5th Avenue station in October 2016.
- A 1200 class train at Balintawak station in December 2021.
- A 1200 class train with wrap advertising at Vito Cruz in August 2023.
The LRTA 1200 class is the third-generation class of high-floor light rail vehicles (LRV) of the LRT Line 1.
Purchased as part of the second phase of the capacity expansion of the line, the trains entered service in December 2006.[9]
With the completion of the initial capacity expansion of the LRT Line 1, its capacity was raised by half with the introduction of seven four-car trains and the upgrading of the existing two-car trains to three cars in 1999. However, its capacity was expected to become insufficient once the railway network in Metro Manila was completed in 2004 with the full opening of the LRT Line 2.[10]
On April 7, 2000, the Japan Bank for International Cooperation (JBIC) extended a ₱8.893 billion loan to finance the second phase of the capacity expansion project.[11] While existing rolling stock were refurbished, twelve more four-car trains were purchased, in conjunction with other upgrades in signaling, telecommunications, and existing railway tracks as well as upgrades at stations and the depot.[12]
Two firms bidded for the project: Kanematsu and Kawasaki Steel Corporation, and the joint venture of Sumitomo Corporation and Itochu. Marubeni was disqualified from the bidding but questioned the technicalities of the bidding procedure. However, delays were encountered in the bidding process, with senator Francisco Tatad claiming on March 21, 2004, that "unconfirmed reports" reaching him disclosed that groups identifying themselves with the President of the Philippines attempted to extort US$1 million from each bidder supposedly as campaign funds for the May 2004 elections. This, according to Tatad, limited the bidders to the two aforementioned firms. His claims were denied by LRTA administrator Pacifico Fajardo, as well as the Department of Transportation and Communications (DOTC; precursor to the DOTr).[13] Fajardo later claimed that JBIC posed "no objection" to the bidding, and said that it was conducted with transparency.[14]
After a delay of more than three years since 2001, Sumitomo and Itochu won the contract and was given the go-ahead in March 2005.[15] Following this, they signed a construction contract with Kinki Sharyo and Nippon Sharyo to manufacture the light rail vehicles.[5][16]
In December 2005, officials from the Light Rail Transit Authority and Manila Tren Consortium—the project consultant of the capacity expansion project, inspected the full-scale mock-up model at Kinki Sharyo's factory in Osaka.[17] It was then displayed at the line's depot in Baclaran in March 2006.[18]
After delivery in the third quarter of 2006, the third-generation trains underwent mainline test runs in the late evening, during non-operating hours. Some scheduled tests in late September 2006 were cancelled due to Typhoon Xangsane.[19]
On December 9, 2006, at a ceremony in Baclaran, Japanese Prime Minister Shinzo Abe and President Gloria Macapagal Arroyo inaugurated the third-generation 1200 class trains. These were then deployed for revenue operations two days later.[20] The trains raised the line's capacity from 27,000 passengers per hour per direction to 40,000 passengers per hour per direction.[18]
On September 6, 2018, a 3G trainset was decorated with a special Gabay Guro decoration to celebrate the National Teachers' Month in the Philippines. The decoration has a library-themed look with images of books. The special themed train was launched on that date and ended a year later.[21]
Like the 1100 class, the 1200 class shares the 6-axle rigid body LRV design consisting of two articulated cars.
The car body has a length of 26 meters (85 feet 4 inches) without couplers, a width of 2.59 meters (8 feet 6 inches), and a height of 3.91 meters (12 feet 10 inches).[22] 1200 class LRVs have 4 electronic sliding doors on both sides.[5] The train car body is made of beadless lightweight stainless steel, with composite materials on the indoor panels and aluminum on the inner bone to reduce weight.[5] 1200 class LRVs have 4 electronic sliding doors on both sides.[5]
Each light rail vehicle has two roof-mounted air-conditioning units that has a cooling capacity of 41,000 kilocalories (170,000 kilojoules). In total, there are eight air-conditioning units in a four-car train set.[22]
The interior is color-toned based on light and dark two-color green in the seats to complement the landscape of Manila. Seats are made of fiber reinforced plastic and has an aluminum bracket type cantilever longitudinal seat for reducing weight. Seating and grip sticks are designed to have ergonomic dimensions, aside from equipment arrangement inside the cab.[22] A wheelchair-compatible space is provided beside the gangway of the intermediate car, alongside an equipped fire extinguisher.[17]
Each LRV consists of four totally enclosed, self-ventilated 3-phase AC induction motors, driven by variable-voltage/variable-frequency drive (VVVF) inverters. Auxiliary power is sourced from 440-volt alternating current static inverters and 110-volt direct current batteries.[23]
Each LRV has three inside-frame bogies, similar to the 1000 class. The bogies consist of two motorized bogies at the ends of the LRV and one shared trailer bogie under the articulation.[5] The primary suspension is a chevron rubber spring, while the secondary suspension is an air suspension, similar to the 1100 class.[24] Semi-permanent couplers are present in the ends of each light rail vehicle except the driving cab section of the MC car.
The 1200 class employs a regenerative and electronically controlled pneumatic braking system manufactured by Knorr-Bremse.[1] The resistors are mounted on the roof for backup regenerative brakes.[5] Each VVVF controller is equipped with an Electronic Command Braking Device (ECBD).[22] Disc brakes are present on the bogies.[23]
The configuration of a four-car trainset is Mc–M–M–Mc. Mc denotes a driving car while M denotes an intermediate car.
All 1200 class trains were designed and built to agreed specifications with no comparable differences.
In the Philippines, we undertook the Manila LRT Line 1 Capacity Expansion 2 as a JV contractor and we supplied rolling stock and railway systems.
_05.jpg/1280px-Vito_Cruz_station_(Moonsons;_2023-08-03)_05.jpg)
_(Caloocan)(2017-07-08).jpg/1280px-LRT-1_-_inside_the_train_(3rd_generation)_(Caloocan)(2017-07-08).jpg)
