Railways with a track gauge of 3 ft 6 in (1,067 mm) were first constructed as horse-drawn wagonways. The first intercity passenger railway to use 3 ft 6 in was constructed in Norway by Carl Abraham Pihl. From the mid-nineteenth century, the 3 ft 6 ingauge became widespread in the British Empire. In Africa it became known as the Cape gauge as it was adopted as the standard gauge for the Cape Government Railways in 1873, although it had already been established in Australia and New Zealand before that. It was adopted as a standard in New Zealand, South Africa, Indonesia, Japan, the Philippines, Taiwan, and Queensland (which has the second largest narrow gauge network in the world) in Australia.
There are approximately 112,000 kilometres (70,000 mi) of 1,067 mm gauge track in the world, which are classified as narrow-gauge railways.
History
1795
One of the first railways to use 3 ft 6 in (1,067 mm) gauge was the Little Eaton Gangway in England, constructed as a horse-drawn wagonway in 1795. Other 3 ft 6 in gauge wagonways in England and Wales were also built in the early nineteenth century.
The construction of the railroad from the Castillo de Buitrón mine to the pier of San Juan del Puerto, Huelva, Spain, began. The width was 3 ft 6 in (1,067 mm).
The 3 ft 6 in was adopted by New Zealand to expedite the development of transport under Julius Vogel's Great Public Works Policy; see The Vogel Era.
1871
Nicolaas Henket and J.C Schölmann recommended that the Dutch East Indies government use 3 ft 6 in gauge for railways in Java. The line between Batavia NIS and Koningsplein Station opened on 15 September 1871.[citation needed]
1871
The Canadian Toronto, Grey and Bruce Railway and the Toronto and Nipissing Railway were opened, promoted by Pihl and Fitzgibbon and surveyed by Wragge as an engineer of Fox. The Canadian province of Prince Edward Island began building its 3 ft 6 in network.
1872
In January Robert Fairlie advocated the use of 3 ft 6 in gauge in his book Railways Or No Railways: Narrow Gauge, Economy with Efficiency v. Broad Gauge, Costliness with Extravagance.[2]
The first 3 ft 6 in gauge railway opened in Japan. It had been proposed by the British civil engineer Edmund Morel based on his experience building railways in New Zealand.[3]
The Cape Colony adopted the 3 ft 6 in gauge.[4][5] After conducting several studies in southern Europe, the Molteno Government selected the gauge as being the most economically suited for traversing steep mountain ranges.[6] Beginning in 1873, under supervision of Railway engineer of the Colony William Brounger,[7] the Cape Government Railways rapidly expanded and the gauge became the standard for southern Africa.[8][9]
1876
Natal also converted its short 10 kilometres (6.2 miles) long Durban network from 4 ft 8+1⁄2 in (1,435 mm) standard gauge prior to commencing with construction of a network across the entire colony in 1876.[10] Other new railways in Southern Africa, notably Mozambique, Bechuanaland, the Rhodesias, Nyasaland and Angola, were also constructed in 3 ft 6 in gauge during that time.
After 1876
In the late nineteenth and early twentieth century numerous 3 ft 6 in gauge tram systems were built in the United Kingdom and the Netherlands. Newfoundland began its Cape gauge network in 1881.
Nomenclature
This gauge is sometimes called Cape gauge, named after the Cape Colony in what is now South Africa, which adopted it in 1873.[4] "Cape gauge" was used in several English-speaking countries.[11] The equivalent of Cape gauge is used in other languages, such as the Dutchkaapspoor, GermanKapspur, Norwegiankappspor and Frenchvoie cape. After metrication in the 1960s, the gauge was referred to in official South African Railways publications as 1,065 mm (3 ft 5+15⁄16 in) instead of 1067 mm.[12]
In Sweden, the gauge was nicknamed Blekinge gauge, as most of the railways in the province of Blekinge had this gauge.[13]
Colonial Gauge was used in New Zealand.[14][15]
In Australia, this gauge is typically referred to as narrow gauge in comparison to 4 ft 8+1⁄2 in (1,435 mm) standard gauge or 5 ft 3 in (1,600 mm) broad gauge. In some instances, simply 3 foot 6 inch — or in rarer cases medium gauge — is used to distinguish it from other narrow gauges.[16]
In Japan the 1,067 mm (3 ft 6 in) gauge, along with other narrow gauges, is referred to as kyōki (狭軌), which directly translates as narrow gauge, to differentiate it from the Shinkansen lines. It is defined in metric units. It is commonly referred to as 三六軌間 (36 gauge), which derives from the 3 ft 6 in.
^MacDermot, E. T. (1931). History of the Great Western Railway. Volume II: 1963–1921. London: Great Western Railway.
^"Railways Or No Railways: Narrow Gauge, Economy with Efficiency. V. Broad Gauge, Costliness with ..." archive.org.
^Semmens, Peter (1997). High Speed in Japan: Shinkansen - The World's Busiest High-speed Railway. Sheffield, UK: Platform 5. p. 1. ISBN 1-872524-88-5.
^ a bRansom, P.J.G. (1996). Narrow Gauge Steam. Oxford Publishing Co. p. 107. ISBN 0-86093-533-7.
^Griffiths, Ieuan Ll; Rowland, Susan (1994). The Atlas of African Affairs. Routledge. p. 168. ISBN 0-415-05488-5.
^Bond, John (1956). "Chapter 19, The Makers of Railways: John Molteno". They were South Africans. Oxford University Press. p. 170.
^"Cultural, historical assessment of the Hex Pass Railway, Worcester to de Doorns" (PDF). Archived from the original (PDF) on 6 March 2014. Retrieved 6 March 2014.
^Burman, Jose (1984), Early Railways at the Cape, Cape Town: Human & Rousseau, ISBN 0-7981-1760-5
^Davenport, D.E. A Railway Sketch of South Africa. 1882. Cape Town.
^Bulpin, TV (1977) [1966]. Natal and the Zulu Country (3rd ed.). Cape Town: T.V. Bulpin Publications Ltd. pp. 224–227.
^"In German South-West Africa". Westminster Gazette. 1 October 1912. p. 4.
^South African Railways Index and Diagrams Electric and Diesel Locomotives, 610 mm and 1065 mm Gauges, Ref LXD 14/1/100/20, 28 January 1975, as amended
^"Kalmar, 29-03-1897 (Blekinge-spårvidd)". Archived from the original on 27 April 2014. Retrieved 27 April 2014.
^Zealand, National Library of New. "Papers Past - The Evening Post. TUESDAY, MAY 12,1874. (Evening Post, 1874-05-12)". paperspast.natlib.govt.nz.
^"CR4 - Blog Entry: Track Gauges and Railway Construction (Part 1)". cr4.globalspec.com. Archived from the original on 4 March 2014. Retrieved 4 March 2014.
^Knowles, J.W. (1983). "Adoption of the 3ft. 6ins. gauge for Queensland railways" (PDF). Australian Railway Historical Society. Archived (PDF) from the original on 2 April 2012. Retrieved 17 November 2020.
^Railway and Locomotive Engineering, vol. 26 (1913), pp. 91–92
^Dominican Republic public service railways, 1870–1990 (Los ferrocarriles de servicio público de República Dominicana, 1870–1990) by Antonio Santamaría García (1993), table 4 "Empresas ferroviarias de servicio público de República Dominicana", pp. 13
^"CIA World Factbook, Ecuador".
^"CIA World Factbook, Indonesia".
^"CIA World Factbook, Japan".
^Zealand, National Library of New. "Papers Past – The Press. Monday, September 26, 1870. (Press, 1870-09-26)". paperspast.natlib.govt.nz.
^Bjerke, T. & Holom, F. (2004) Banedata 2004. Hamar/Oslo: Norsk Jernbanemuseum & Norsk Jernbaneklubb. p. 98
^Morrison, Allen (1 February 2008). "The Tramways of Colombia / Panama". Retrieved 1 May 2011.
^Spoornet (Transnet's predecessor), Manual for Track Maintenance, July 2000, http://www.spoornet.co.za/SpoornetWebContentSAP/documents/track_maintenance.pdf Archived 23 March 2012 at the Wayback Machine
^Ferropedia - Ferrocarril Cartagena - Los Nietos, http://ferropedia.es/wiki/Japanese_gauge/Ferrocarril_Cartagena_-_Los_Nietos Archived 9 February 2020 at the Wayback Machine