stringtranslate.com

Engine downsizing

In the automotive industry, engine downsizing is the practice of utilizing smaller combustion engines over larger ones of the same power capacity when manufacturing vehicles. It is the result of car manufacturers attempting to provide more efficient vehicles that emit fewer emissions,[1] often mandated by legislative standards.[2] The term generally relates to traditional internal combustion engines powered by petrol or diesel.

Many manufacturers are reducing engine displacement and the number of cylinders. By adding a forced aspiration device (turbocharger or supercharger) and direct injection technology, they provide a powerful engine with similar performance to a much larger engine, but with much improved efficiency and reduced carbon emissions. A smaller engine is also often lighter, so less overall energy is expended while driving. Reducing the number of cylinders also reduces the amount of friction in the engine, increasing the efficiency.[3]

Some observers have not been convinced by manufacturer's claims that reducing engine size provides a more efficient car.[4] Some tests have shown that some downsize engines have lower fuel economy in everyday driving than the larger engines they replace.[5]

Recent research and progress

The University of Bath published research carried out by its Powertrain and Vehicle Research Centre which demonstrated that it is possible to reduce engine capacity by 60% and still achieve the torque curve of a modern, large-capacity naturally-aspirated engine, while encompassing the attributes necessary to employ such a concept in premium vehicles.[6]

Reliability

In an Auto Bild investigation of a 1.0 EcoBoost Ford Focus having driven 100,000 kilometres (62,000 mi), no major issues were found surrounding the engine, with only 'minimal oil sweating between cylinder and block' being noticed.[7] However, the turbocharged Audi 2.0 TFSI petrol engine has frequently been reported to suffer from more severe oil leakage around the cylinder seals, with up to 1 liter of oil consumed per 300 kilometres (190 mi).[8] Similar issues have been reported for Volkswagen Group 1.4 and 1.8 TFSI engines.[9] According to a J.D. Power survey, downsize engines scored significantly lower in reliability than older engines.[10]

Examples

References

  1. ^ Squatriglia, Chuck (16 September 2011). "Three Is the New Four as Engines Downsize". Wired. Retrieved 12 February 2012.
  2. ^ "Market Forecast : Fun size". Archived from the original on 6 October 2013.
  3. ^ Kirwan, John E., et al. "3-cylinder turbocharged gasoline direct injection: A high value solution for low CO2 and NOx emissions." SAE Int. J. Engines 3.1 (2010): 355-371.
  4. ^ "Engine Displacement Downsizing Where's the fuel-economy gain?". Car and Driver. July 2009. Retrieved 12 February 2012.
  5. ^ "Consumer Reports finds small turbo engines don't deliver on fuel economy claims". 5 February 2013.
  6. ^ Lewis, A.G.J. (1 April 2014). ""Ultra Boost for Economy: extending the limits of extreme engine downsizing"". SAE International Journal of Engines. Retrieved 8 July 2014.
  7. ^ "Ford Focus im Dauertest".
  8. ^ "BBC highlight Audi 2.0 TFSI oil usage 'issue'". 31 December 2014.
  9. ^ "Hoog olieverbruik TFSI-motor". 28 September 2015.
  10. ^ Ingram, Anthony (16 February 2014). "Are New, Smaller, Higher-Mileage Engines Less Reliable?".
  11. ^ Simister, John (February 2012). "Driven: Ford Focus 1.0 Ecoboost". Car Magazine. Retrieved 12 February 2012.
  12. ^ a b ULRICH, LAWRENCE (9 September 2011). "This Time, the Downsizing Will Happen Under the Hood". New York Times. Retrieved 12 February 2012.