stringtranslate.com

Digital data

Digital clock. The time shown by the digits on the face at any instant is digital data. The actual precise time is analog data.

Digital data, in information theory and information systems, is information represented as a string of discrete symbols, each of which can take on one of only a finite number of values from some alphabet, such as letters or digits. An example is a text document, which consists of a string of alphanumeric characters. The most common form of digital data in modern information systems is binary data, which is represented by a string of binary digits (bits) each of which can have one of two values, either 0 or 1.

Digital data can be contrasted with analog data, which is represented by a value from a continuous range of real numbers. Analog data is transmitted by an analog signal, which not only takes on continuous values but can vary continuously with time, a continuous real-valued function of time. An example is the air pressure variation in a sound wave.

The word digital comes from the same source as the words digit and digitus (the Latin word for finger), as fingers are often used for counting. Mathematician George Stibitz of Bell Telephone Laboratories used the word digital in reference to the fast electric pulses emitted by a device designed to aim and fire anti-aircraft guns in 1942.[1] The term is most commonly used in computing and electronics, especially where real-world information is converted to binary numeric form as in digital audio and digital photography.

Symbol to digital conversion

Since symbols (for example, alphanumeric characters) are not continuous, representing symbols digitally is rather simpler than conversion of continuous or analog information to digital. Instead of sampling and quantization as in analog-to-digital conversion, such techniques as polling and encoding are used.

A symbol input device usually consists of a group of switches that are polled at regular intervals to see which switches are switched. Data will be lost if, within a single polling interval, two switches are pressed, or a switch is pressed, released, and pressed again. This polling can be done by a specialized processor in the device to prevent burdening the main CPU.[2] When a new symbol has been entered, the device typically sends an interrupt, in a specialized format, so that the CPU can read it.

For devices with only a few switches (such as the buttons on a joystick), the status of each can be encoded as bits (usually 0 for released and 1 for pressed) in a single word. This is useful when combinations of key presses are meaningful, and is sometimes used for passing the status of modifier keys on a keyboard (such as shift and control). But it does not scale to support more keys than the number of bits in a single byte or word.

Devices with many switches (such as a computer keyboard) usually arrange these switches in a scan matrix, with the individual switches on the intersections of x and y lines. When a switch is pressed, it connects the corresponding x and y lines together. Polling (often called scanning in this case) is done by activating each x line in sequence and detecting which y lines then have a signal, thus which keys are pressed. When the keyboard processor detects that a key has changed state, it sends a signal to the CPU indicating the scan code of the key and its new state. The symbol is then encoded or converted into a number based on the status of modifier keys and the desired character encoding.

A custom encoding can be used for a specific application with no loss of data. However, using a standard encoding such as ASCII is problematic if a symbol such as 'ß' needs to be converted but is not in the standard.

It is estimated that in the year 1986, less than 1% of the world's technological capacity to store information was digital and in 2007 it was already 94%.[3] The year 2002 is assumed to be the year when humankind was able to store more information in digital than in analog format (the "beginning of the digital age").[4][5]

States

Digital data come in these three states: data at rest, data in transit, and data in use. The confidentiality, integrity, and availability have to be managed during the entire lifecycle from 'birth' to the destruction of the data.[6]

Properties of digital information

All digital information possesses common properties that distinguish it from analog data with respect to communications:

Historical digital systems

Even though digital signals are generally associated with the binary electronic digital systems used in modern electronics and computing, digital systems are actually ancient, and need not be binary or electronic.

See also

References

  1. ^ Ceruzzi, Paul E (29 June 2012). Computing: A Concise History. MIT Press. ISBN 978-0-262-51767-6.
  2. ^ Heinrich, Lutz J.; Heinzl, Armin; Roithmayr, Friedrich (29 August 2014). Wirtschaftsinformatik-Lexikon (in German). Walter de Gruyter GmbH & Co KG. ISBN 978-3-486-81590-0.
  3. ^ Martin Hilbert; Priscila López (10 February 2011). "The World's Technological Capacity to Store, Communicate, and Compute Information". Science. Vol. 332, no. 6025. pp. 60–65. doi:10.1126/science.1200970. Archived (PDF) from the original on 31 May 2011. Also "Supporting online material for The World's Technological Capacity to Store, Communicate, and Compute Information" (PDF). Science. doi:10.1126/science.1200970. Archived (PDF) from the original on 31 May 2011. Free access to the article through here: www.martinhilbert.net/WorldInfoCapacity.html/
  4. ^ "video animation on The World's Technological Capacity to Store, Communicate, and Compute Information from 1986 to 2010". 11 June 2011. Archived from the original on 21 February 2013. Retrieved 6 November 2013 – via YouTube.
  5. ^ a b Miller, Vincent (2011). Understanding digital culture. London: Sage Publications. sec. "Convergence and the contemporary media experience". ISBN 978-1-84787-497-9.
  6. ^ "The three states of information". The University of Edinburgh. Archived from the original on 14 April 2021. Retrieved 21 February 2021.

Further reading