Lockyer Creek Railway Bridge (Murphys Creek) is a heritage-listed railway bridge on the Toowoomba–Helidon line over Lockyer Creek at Murphys Creek, Lockyer Valley Region, Queensland, Australia. It was designed by William Pagan and built from c. 1910 to 1911. It was added to the Queensland Heritage Register on 21 October 1992.[1]
The railway opened for traffic between Helidon and Toowoomba on 1 May 1867. From the 1870s there has been a continuing process of improving the Main Line between Brisbane and Toowoomba because of its importance as a major arterial route. As part of that process, which required the replacement of original bridges to carry heavier loads, construction work began in 1909 on a reinforced concrete arch bridge over Lockyer Creek at 77 miles 55 chains (125.0 km) immediately following the construction of one at 75 miles 48 chains (121.7 km). Design of the innovative bridge was completed and signed by Chief Engineer, William Pagan on 31 March 1910. The bridge and deviation were completed and brought into use on 21 December 1911.[1]
A concrete arch bridge aligned on a straight alignment and carrying a single track on a ballasted deck. Its spans are:[1]
The spandrel columns are arranged in pairs, one for each arch rib, with crossbracing in concrete. The arch ribs are parabolic of rectangular section. There is a concrete balustrade. The whole structure is in cast-in-situ concrete.[1]
Lockyer Creek Railway Bridge was listed on the Queensland Heritage Register on 21 October 1992 having satisfied the following criteria.[1]
The place is important in demonstrating the evolution or pattern of Queensland's history.
This reinforced concrete arched bridge on a straight alignment has one of the largest spans of its type in Australia.[1]
The place is important because of its aesthetic significance.
It has an innovative and aesthetically pleasing design.[1]
The place is important in demonstrating a high degree of creative or technical achievement at a particular period.
This reinforced concrete arched bridge on a straight alignment has one of the largest spans of its type in Australia.[1]
The place has a special association with the life or work of a particular person, group or organisation of importance in Queensland's history.
Its innovative and aesthetically pleasing design was associated with the Chief Engineer, William Pagan.[1]
This Wikipedia article was originally based on "The Queensland heritage register" published by the State of Queensland under CC-BY 3.0 AU licence (accessed on 7 July 2014, archived on 8 October 2014). The geo-coordinates were originally computed from the "Queensland heritage register boundaries" published by the State of Queensland under CC-BY 3.0 AU licence (accessed on 5 September 2014, archived on 15 October 2014).
Media related to Lockyer Creek Railway Bridge (Murphys Creek) at Wikimedia Commons