Tipo de caldera acuotubular de circulación natural.
A cornertube boiler is a type of natural circulation water-tube boiler which differentiates itself from other water tube boilers by its characteristic water-steam cycle and a pre-separation of heated steam from the steam-water mixture occurs outside the drum and the unheated downcomers.[1]
Principle
Cornertube boilers were developed for small steam output. The design was based around two factors that, along with excellent water circulation, should be appropriate cooling even at light loads. Its special feature is its Monocoque body i.e. the unheated downcomers form the supporting frame work[2] and not the thermally loaded tubes, hence the name corner tube boiler.[1] Moreover, the piping-arrangement (system) is also responsible; to manage the riser tubes and water distribution in riser tubes and down comers and to collect the steam water mixture and to make a certain amount of pre-separation of steam and water mixture.[3][4] Put simply, the water circulation takes place simultaneously through the drum and through the unheated down comers outside the drum.[5]
History
During World War II a shortage of fuels like gas and petrol alongside the idea of running diesel engines with Steam occurred and led to the development of a new type of boiler.[6] Dr. Henrich Vorkauf came up with the first design of a new natural circulation boiler which was then installed into a truck in the year 1944.[2]Using this principle Dr. Vorkauf developed a single drum boiler with downcomers in four corners and named this boiler Eckrohrkessel (German name). Corner Tube Boiler is word to word translation of Eckrohrkessel(Eck=Corner, rohr=tube and kessel=boiler).
Working
Schematic working of water circulation in corner tube boiler
The water flows down from the drum (6) through the down comers (7) and it is distributed in the different riser tubes(4). The steam-water mixture circulates and flows in the upward direction through the riser tubes. In the radiation heated area through the pre-separator (also known as cross-collector) (3) occurs the pre-separation of steam from the steam water mixture. The separated steam flows through the overhead pipe (5) and the steam-water mixture flows through the collector pipe (3) to the drum (6) as well. In the drum occurs the final separation of steam from steam water mixture. The rest amount of water flows through the unheated return tubes (1) and downcomers (7) to the rear wall distributor/header (2). Due to the water returning from the unheated downcomers (1) a lively circulation takes place .[7]
Advantages
Self supporting construction by the four downcomers, i.e. the four downcomers in the four corners contribute to a rigid framework and requires no hanging frames or equipments.
It can expand from the base in all directions and adapt to different operating conditions.[2]
The thermal expansion is from top to bottom and with the usage of grate firing the grate firing the thermal expansion difference is minimised there by manifesting the sealing between grate and the boiler.
The shorter path of water supply to the riser tubes leads to faster and more reliable operation on different loads and a quick start up.[1]
It can be coupled with concentrated solar power plant (CSP) as well in order to have increased efficiency (above 33%) where the main fuels are biomass, landfill gas and wood.[8]
Construction and arrangement of heating surfaces is flexible as water can be supplied directly from the drum which is placed quite far away from heating surfaces.[1]
Low risk of Foaming. As the water and the steam-water mixture which is fed into the drum maintains the same and constant level all the time leaving the space above water level in drum (please refer to the schematic diagram pic).[1]
Quick load variations and reliable operation in variable loads and at any significant change in pressure as the water level in the drum is stable and remains inaffected from turbulence.
Less steel is needed as there is no lower boiler drum and moreover the absence of lower drum eliminated unwanted thermal stresses.
Disadvantages
The designing and construction is a result of detailed engineering and hence makes it expensive.
^ a b c d eThome-Kozmiensky, Karl J. (1994). Thermische Abfallbehandlung. Germany: EF für Energie und Umwelttechnik. pp. 393–394. ISBN 3-924511-77-2.
^ a b cMayer, Fritz (1986). The Corner Tube Boiler. Germany: Resch. p. 99. ISBN 3-87806-033-5.
^ Bloque, F; Lalone, Girouard, Letendere (mayo de 1977). "Diseño de una caldera para combustibles residuales". Fuerza . Estados Unidos: 75.{{cite journal}}: Mantenimiento CS1: varios nombres: lista de autores ( enlace )
^ Josefsson, Lars. "Caldera Eckrohr". Estima de vapor . Consultado el 11 de marzo de 2013 .
^ Vorkauf, Henrich (1957). Der Wasserumlauf en Eckrohrkessel . Alemania: Energie. pag. 3.
^ ab Noot, Wolfgang (2011). Vom Kofferkessel bis zum Großkraftwerk Die Entwicklung im Kesselbau (en alemán). Alemania: Vulkan Verlag. pag. 345.ISBN978-3-8027-2558-6.
^ Vorkauf, Henrich (1951). "El Eckrohrkessel". Revista VDI . 93 (14): 395–397.
^ Peterseim JH, White, S., Tadros, A., Vanz, E. (2012). Estudio de prefactibilidad para una planta híbrida de energía solar concentrada y multicombustibles en Swanbank, QLD. Preparado para Thiess Services Pty Ltd por el Institute for Sustainable Futures, University of Technology, Sydney, Australia. 21-25.